Free Practice Questions for USGBC LEED-Green-Associate Exam

Regenerative design is a type of design that goes beyond sustainability and aims to restore or enhance the natural systems that support life. Regenerative design projects not only minimize their environmental impact, but also contribute positively to the environment and society. An example of regenerative design is a building that generates electricity from renewable sources, such as solar panels or wind turbines, and sends the excess electricity to the grid, thereby reducing greenhouse gas emissions and supporting the transition to a clean energy economy.

ASHRAE 62.1 is a standard that ensures adequate ventilation is supplied to building occupants. ASHRAE stands for the American Society of Heating, Refrigerating and Air-ConditioningEngineers, a professional organization that develops standards and guidelines for the design, operation, and maintenance of buildings. ASHRAE 62.1 is a standard that specifies the minimum ventilation rates and other measures for new and existing buildings that are intended to provide acceptable indoor air quality (IAQ) for the occupants. Ventilation is the process of supplying outdoor air to or removing indoor air from a building. Adequate ventilation is important for maintaining good IAQ, which can affectthe health, comfort, and productivity of the occupants13. References: LEED v4 Green Associate Candidate Handbook1, ASHRAE’s Standard 62.13

The footprint of a building is the area of ground that it covers, defined by its perimeter. It’s essentially the shape that results when you trace around the outer walls of a building plan. This term is used in architecture and urban planning to describe the space that a building occupies on a site. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

The best way to prevent a building’s indoor pollutant(s) is to eliminate or control pollutants at the source. Indoor pollutants are substances or particles that can adversely affect the indoor air quality (IAQ) of a building and the health, comfort, and productivity of the occupants. Indoor pollutants can originate from various sources, such as building materials, furnishings, cleaning products, combustion appliances, outdoor air, or occupant activities. Eliminating or controlling pollutants at the source can prevent them from entering or spreading in the indoor environment, which can reduce the exposure and risk for the occupants. Some examples of source control strategies are: using low-emitting materials, installing local exhaust ventilation, sealingcombustion appliances, implementing green cleaning practices, and prohibiting smoking13. References: LEED v4 Green Associate Candidate Handbook1, EPA’s Indoor Air Quality3

An occupant survey is the most efficient way for building users to rate the heating and air-conditioning and other aspects of work spaces. An occupant survey is a tool that collects feedback from building occupants about their satisfaction with various aspects of their indoor environment, such as thermal comfort, lighting quality, acoustic quality, air quality, and spatial layout. An occupant survey can help identify areas for improvement, monitor performance, evaluate design strategies, and inform future decisions. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving indoor environmental quality is to “conduct occupant surveys on thermal comfort” [1, p. 16]. References: LEED Green Associate Candidate Handbook, [Occupant Surveys | Center for the Built Environment]

An owner who wants to update the interior materials of the office while promoting a healthier indoor work environment using LEED strategies can specify low-emitting materials as one of the strategies to achieve this goal. Low-emitting materials are materials that have low or no emissions of volatile organic compounds (VOCs) or other pollutants into the indoor air. VOCsare organic chemicals that can evaporate or vaporize at room temperature and can adversely affect the indoor air quality (IAQ) of a building and the health, comfort, and productivity of the occupants. Some sources of VOCs in buildings are paints, coatings, adhesives, sealants, flooring, furniture, and cleaning products. Specifying low-emitting materials can reduce the exposure and risk of VOCs for the occupants and improve IAQ12. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide2

The LEED for Neighborhood Development rating system has four certification levels: Certified, Silver, Gold, and Platinum. Each level requires a minimum number of points to achieve, based on the total number of available points in the rating system. The total number of available points is 110, and the minimum points for Platinum certification is 801. Therefore, the maximum points a new construction platinum LEED for Neighborhood Development certification level can earn are 110 - 80 = 30 points. However, there are also four regional priority credits that can be earned for addressing geographicallyspecific environmental issues2. These credits are worth one point each, and can be added to the total score of a project. Therefore, the maximum possible points a new construction platinum LEED for Neighborhood Development certification level can earn are 30 + 4 = 34 points. However, the question asks for the maximum points that can be earned by a new construction project. According to the LEED Reference Guide for ND, new construction projects must meet all prerequisites and achieve at least 50% of the points available under the Green Infrastructure and Buildings category3. This category has 21 criteria, each worth one point, except forCertified Green Buildings, which is worth up to five points4. Therefore, the maximum points available under this category are 21 + 4 = 25 points. Since new construction projects must achieve at least 50% of these points, they must earn at least 13 points under this category. This means that they have less points to earn under the other categories (Smart Location and Linkage, and Neighborhood Pattern and Design), which have a total of 32 criteria worth one point each4. Therefore, the maximum points a new construction project can earn under these categories are 110 - 25 - 13 = 72 points. Adding the regional priority credits, the maximum possible points a new construction project can earn are 72 + 4 = 76 points. To achieve Platinum certification, a new construction project must earn at least 80 points1. Therefore, the maximum points a new construction platinum LEED for Neighborhood Development certification level can earn are 80 - 76 = 4 points under each of the four categories: Smart Location and Linkage, Neighborhood Pattern and Design, Green Infrastructure and Buildings, and Regional Priority Credits. Hence, the answer is D. 16.

=

LEED certification for neighborhood development

LEED Reference Guide for ND

LEED for NeighborhoodDevelopment - Wikipedia

LEED rating system

LEED for Neighborhood Development - Infrastructure Tool Navigator

According to the LEED credit library, the Energy and Atmosphere category for Building Design and Construction: New Construction and Major Renovation has 6 prerequisites and 11 credits, with a total of 33 possible points. The prerequisites are:

Fundamental Commissioning and Verification (required)

Minimum Energy Performance (required)

Building-Level Energy Metering (required)

Fundamental Refrigerant Management (required)

Construction Activity Pollution Prevention (required)

Advanced Energy Metering (required)

The credits are:

Enhanced Commissioning (2-6 points)

Optimize Energy Performance (1-18 points)

Advanced Energy Metering (1 point)

Demand Response (1-2 points)

Renewable Energy Production (1-3 points)

Enhanced Refrigerant Management (1 point)

Green Power and Carbon Offsets (1-2 points)

The LEED Pilot Credit Library is a collection of new credits that are being tested for potential inclusion in future versions of LEED1. The purpose of the library is to allow projects to experiment with innovative strategies and provide feedback to USGBC on their effectiveness, feasibility, and market readiness2. The library also helps USGBC to respond to evolving environmental issues and stakeholder needs2.

Recycling is a strategy that can be used to reduce the amount of construction waste that is sent to landfills or incinerators. Recycling involves collecting, sorting, processing, and reusing or selling materials that would otherwise be discarded as waste. Recycling can save natural resources, reduce greenhouse gas emissions, create jobs, and lowerdisposal costs1 . References: LEED v4 Green Associate Candidate Handbook1, EPA’s Recycling Basics