Free Practice Questions for USGBC LEED-Green-Associate Exam

An externality is a consequence of an economic activity that affects other parties who are not directly involved in the activity. Externalities can be positive or negative, depending on whether they create benefits or costs for others. When a developer builds a new shopping center in a rural area, one externality might be an increase in traffic on adjacent roads. This is a negative externality because it imposes costs on other road users who are not part of thedevelopment project, such as increased travel time, fuel consumption, air pollution, noise pollution, and accident risk13. References: LEED v4 Green Associate Candidate Handbook1, Investopedia’s Externality

Building orientation is the element of design that can be used to take advantage of natural ventilation, solar energy and daylight. Building orientation refers to the position and direction of a building in relation to the sun, wind, and other environmental factors. By orienting a building properly, it can maximize the benefits of passive design strategies such as daylighting, natural ventilation, and solar energy. For example, a building can be oriented to face the south or north in temperate climates to capture more sunlight for heating and lighting, or to face the east or west in hot climates to avoid excessive solar heat gain and glare. A building can also be oriented to align with the prevailing wind direction to enhance natural ventilation and cooling. Building orientation can also affect the shape, size, and placement of windows, doors, roofs, and other architectural elements that influence the performance and comfort of a building. References: Passive Design Strategies | Sustainability Workshop, section “Building Massing & Orientation”; Back to Basics: Natural Ventilation and its Use in Different Contexts | ArchDaily, section “Orientation”; Courtyard configuration to optimize shading, daylight and ventilation …, section “Introduction”

LEED Interior Design and Construction (ID+C) is a rating system that applies to projects that are a complete interior fit-out or renovation1. Data centers are one of the project types that can use this rating system, as they have specific requirements for energy efficiency, cooling, and reliability2.

=

LEED rating system

LEED rating system selection

LEED Rating Systems Overview

The amount of landfill-destined waste generated during project construction can be reduced by requiring the general contractor to follow requirements for using dimensional construction materials, prefabrication or material efficient framing. These methods reduce the amount of material waste by minimizing cutting, fitting, and trimming on site, and by using standardized or modular components that can be easily reused or recycled. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving materials and resources efficiency is to “reduce construction waste through efficient framing techniques” [1, p. 15]. References: LEED Green Associate Candidate Handbook, [Reducing Construction Waste | U.S. Environmental Protection Agency]

LEED encouragesTransportation Demand Managementstrategies to reduce single-occupancy vehicle use when access to public transit is not available. One such strategy is:

“Encouraging carpooling… provides options to users in areas without access to transit.”

Offering preferred parking for single-use vehicles contradicts the intent, and LEED cannot require changes to local transit systems. Providing extra parking encourages single-occupancy vehicle use.

A charrette is an intensive, multi-disciplinary workshop with the aim of developing a design or vision for a project or planning activity. Charrettes are often conducted to design such things as parks and buildings, or to plan communities or transportation systems. A charrette should take place at the beginning of the project, when the design team can engage with all the stakeholders, including the client, users, consultants, contractors, regulators, and community members. A charrette at this stage can help to:

Establish clear goals and objectives for the project

Identify opportunities and constraints for the site and program

Generate creative and innovative ideas and solutions

Foster collaboration and consensus among diverse perspectives

Reduce conflicts and delays during later phases of the project

Enhance communication and trust among the project team

The other options are not appropriate phases for a charrette. Post commissioning is too late to influence the design or planning of the project. During the design process, some decisions may have already been made or some stakeholders may have been excluded. During the construction process, changes may be costly or impractical to implement. References: : Charrette

The Energy Policy Act of 1992 (EPAct of 1992) is a United States government act that set goals, createdmandates, and amended utility laws to increase clean energy use and improve overall energy efficiency in the United States1. The EPAct of 1992 is a baseline standard for the Energyand Atmosphere prerequisite category in LEED v4, which aims to reduce the environmental and economic impacts of excessive energy use and promote the use of renewable and alternative energy sources2. The EPAct of 1992 establishes the minimum energy performancerequirements for buildings, such as lighting power density, HVAC efficiency, and water heating efficiency3. The EPAct of 1992 also provides tax incentives and grants for energy conservationand renewable energy projects1. The EPAct of 1992 was amended by the Energy Policy Act of 2005, which updated some of the provisions and standards of the original act4.

The conventional building process stages can vary depending on the type, size, and complexity of the project, but a general overview can be found in this article. According to the article, the stages are:

Planning: This is the stage where the project idea is conceived, the feasibility and budget are assessed, the design and engineering are developed, the permits and approvals are obtained, and the contractors and subcontractors are hired. This stage involves various disciplined practitioners on project teams, such as architects, engineers, surveyors, estimators, project managers, and lawyers.

Sitework and foundation: This is the stage where the project site is prepared, the utilities are connected, the excavation and grading are done, and the foundation is laid. This stage involves mainly civil engineers, site workers, foundation contractors, and building inspectors.

Rough framing: This is the stage where the structural components of the building are erected, such as walls, floors, roofs, stairs, and windows. This stage involves mainly carpenters, framers, roofers, and window installers.

Exterior construction: This is the stage where the exterior finishes of the building are applied, such as siding, brickwork, stucco, insulation, doors, and landscaping. This stage involves mainly exterior contractors, painters, landscapers, and door installers.

MEP (Mechanical, Electrical, Plumbing): This is the stage where the mechanical systems of the building are installed and tested, such as heating, ventilation, air conditioning (HVAC), plumbing, electrical wiring, lighting fixtures, fire alarms, and security systems. This stage involves mainly mechanical engineers, electricians, plumbers, HVAC technicians, and fire protection specialists.

Finishes and fixtures: This is the final stage where the interior finishes of the building are applied, such as drywall, flooring, cabinets, countertops, appliances, furniture, and accessories. This stage involves mainly interior designers, drywallers, flooring installers, cabinet makers, countertop installers, appliance installers, and furniture movers.

As you can see from this overview, each disciplined practitioner on project teams is involved in different stages of the conventional buildingprocess, depending on their expertise and role. However, they are also required to collaborate and coordinate with each other throughout the design process, which spans from the planning stage to the finishes and fixtures stage. The design process is an iterative and interactive process that involves creating, reviewing, and refining the design plans and specifications to meet the project goals and requirements1. Therefore, the answer is D. As required during design process.

Building a House Step by Step: A Guide From Start to Finish

What Is Disciplined Agile? - Project Management Institute