Weekend Sale - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: sntaclus

examout.co

What is the main purpose of SSH management access?

A.

To support DES 56-bit and 3DES (168-bit) ciphers

B.

To enable secured access to the inbound management interface

C.

To validate management access with username and domain name only

D.

To allow passwords protected with HTTPS encryption to be sent

Configure IPv4 and IPv6 connectivity between two routers. For IPv4, use a /28 network from the 192.168.1.0/24 private range. For IPv6, use the first /64 subnet from the 2001:0db8:aaaa::/48 subnet.

1. Using Ethernet0/1 on routers R1 and R2, configure the next usable/28 from the 192.168.1.0/24 range. The network 192.168.1.0/28 is unavailable.

2. For the IPv4 /28 subnet, router R1 must be configured with the first usable host address.

3. For the IPv4 /28 subnet, router R2 must be configured with the last usable host address.

4. For the IPv6 /64 subnet, configure the routers with the IP addressing provided from the topology.

5. A ping must work between the routers on the IPv4 and IPv6 address ranges.

What is the difference between the TCP and UDP protocols?

A.

TCP ensures ordered, reliable data delivery, and UDP offers low latency and high throughput.

B.

TCP is used for transmitting data over the internet, and UDP is used for transmitting data over a local network.

C.

TCP manages multicast and broadcast data transfers, and UDP only handles unicast communications.

D.

TCP is used to ensure data integrity in a file transfer, and UDP is used to broadcast a message to multiple recipients.

Refer to the exhibit. The static routes were implemented on the border router. What is the next hop IP address for a ping sent to 172.16.153.154 from the border router?

A.

10.56.65.56

B.

10.56.65.65

C.

10.65.56.56

D.

10.65.65.65

Which AP mode wirelessly connects two separate network segments each set up within a different campus building?

A.

mesh

B.

local

C.

bridge

D.

point-to-point