Free Practice Questions for iSQI CTFL_Syll_4.0 Exam

Both black-box test techniques and experience-based test techniques can be applied to functional and non-functional testing. Functional testing focuses on what the system does, while non-functional testing examines how the system performs. These techniques provide flexible and effective methods for assessing various aspects of the system.

Comprehensive and Detailed Explanation From Exact Extract:

From the user story analysis and final achievements:

It was confirmed that dues were paid monthly for over a year, whichcovers criteria 1, 2, 3, 5, 6, 7, and 8.

However, there isno mention of testing for “annual payment”, soacceptance criteria 4, which involveschoosing between monthly or annualpayment, wasnot fully tested.

This reflects the requirement stated in:

“Acceptance criteria are used to: Define the scope… Describe both positive and negative scenarios… Serve as a basis for the user story acceptance testing.”

(ISTQB CTFL Syllabus v4.0, Section 4.5.2, Page 45)

Exploratory testing is an experience-based testing technique where test design and test execution occur simultaneously. It is characterized by the tester actively exploring the application, using their intuition and experience to uncover defects. Exploratory testing sessions are often guided by test charters, which are brief documents outlining the test objectives, scope, and areas to be explored during the session.

These test charters provide a flexible framework that directs the tester's exploration without being overly prescriptive, allowing testers to adapt and investigate new areas as they uncover issues. This approach is particularly useful in dynamic and complex systems where predefined test cases might not cover all scenarios.

According to the ISTQB Glossary of Testing Terms, Version 4.0, 2018, page 18, a failure is “an event in which a component or system does not perform a required function within specified limits”. In this case, the calculator software does not perform the required function of calculating the correct result for 5+6 within the specified limits of accuracy and precision. Therefore, this is an example of a failure.

The other options are incorrect because:

A mistake is “a human action that produces an incorrect result” (page 25). A mistake is not an event, but an action, and it may or may not lead to a failure. For example, a mistake could be a typo in the code, a wrong assumption in the design, or a misunderstanding of the requirement.

A fault is “a defect in a component or system that can cause the component or system to fail to perform its required function” (page 16). A fault is not an event, but a defect, and it may or may not cause a failure. For example, a fault could be a logical error in the code, a missing specification in the design, or a contradiction in the requirement.

An error is “the difference between a computed, observed, or measured value or condition and the true, specified, or theoretically correct value or condition” (page 15). An error is not an event, but a difference, and it may or may not result in a failure. For example, an error could be a rounding error in the calculation, a measurement error in the observation, or a deviation error in the condition.

References = ISTQB Glossary of Testing Terms, Version 4.0, 2018, pages 15-18, 25; ISTQB CTFL 4.0 - Sample Exam - Answers, Version 1.1, 2023, Question 96, page 34.

Confirmation testingis performed after a defect is fixed to confirm it no longer exists (A).Regression testingensures new defects have not been introduced in unchanged parts of the system. Regression testing is broader than confirmation testing and covers unmodified areas affected by the changes. Options B, C, and D misrepresent the relationship and scope of these tests.

Equivalence partitioning (EP)divides input values into classes where test casesrepresent all possible valuesof each partition. The partitions in this scenario are:

≤7 (too cold → W)

8-21 (standstill → X)

22-29 (ideal → Y)

≥30 (too hot → Z)

OptionC ({7,10,25,29})covers all partitionsby selecting representative values:

7 → Too cold (W)

10 → Standstill (X)

25 → Ideal (Y)

29 → Upper boundary of ideal (Y)

Other options do not cover all partitions adequately.

 State testing techniques are a type of dynamic testing techniques that are based on the behavior of the system under test for different input conditions and events. Dynamic testing techniques require the system to be executed with test cases, whereas static testing techniques do not. Static testing techniques can be applied before the code is ready for execution, such as reviews, inspections, walkthroughs, and static analysis. Static testing techniques can help find defects early in the development process, improve the quality of the code, and reduce the cost and effort of dynamic testing. References = ISTQB Certified Tester Foundation Level (CTFL) v4.0 Syllabus, Chapter 4, Section 4.2.1, Page 281; ISTQB Glossary of Testing Terms v4.0, Page 292

Selecting a tester with the required knowledge related to compliance and standards is a correct mitigation option, especially in a highly regulated domain like healthcare. This approach ensures that the tester understands the specific regulatory requirements and standards applicable to the software, thereby reducing the risk of non-compliance. This is more effective than just increasing the number of testers, as it directly addresses the knowledge and expertise needed to mitigate specific product risks​​.

Effort estimate does not depend on the budget of the project, but rather on the scope, complexity, and quality of the software product and the testing activities1. Budget is a constraint that may affect the feasibility and accuracy of the effort estimate, but it is not a factor that determines the effort estimate. Effort estimate is the amount of work required to complete the testing activities, measured in terms of person-hours, person-days, or person-months2.

The other options are correct because:

A. Once the test effort is estimated, resources can be identified and a schedule can be drawn up, as they are interrelated aspects of the test planning process3. Resources are the people,tools, equipment, and facilities needed to perform the testing activities4. Schedule is the time frame and sequence of the testing activities, aligned with the project milestones and deadlines5.

B. Effort estimate can be inaccurate because the quality of the product under tests is not known, as it affects the number and severity of the defects that may be found and the rework that may be needed to fix them6. Quality is the degree to which the software product satisfies the specified requirements and meets the needs and expectations of the users and clients7.

D. Experience based estimation is one of the estimation techniques, which relies on the judgment and expertise of the testers and other project stakeholders to estimate the test effort based on similar projects or tasks done in the past. Experience based estimation can be useful when there is a lack of historical data, formal methods, or detailed information about the software product and the testing activities.

References =

1 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 154

2 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 155

3 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 156

4 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 157

5 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 158

6 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 159

7 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 16

[8] ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 160

[9] ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 161

A test-first approach involves writing tests before writing the code. In this approach, initially, the tests fail because the corresponding functionality is not yet implemented. Afterward, the code is written or modified to make the tests pass. This cycle is repeated iteratively. This method ensures that the code is developed based on predefined tests and helps in identifying issues early in the development process​​.