Free Practice Questions for iSQI CTFL_Syll_4.0 Exam

The testing of software does not demonstrate the absence of defects, but rather the presence of defects or the conformance of the software to the specified requirements1. Testing can never prove that the software is defect-free, as it is impossible to test all possible scenarios, inputs, outputs, and behaviors of the software2. Testing can only provide a level of confidence in the quality of the software, based on the coverage, effectiveness, and efficiency of the testing activities3.

The other options are correct because:

A. Properly designed tests that pass reduce the level of risk in a system, as they verify that the system meets the expected quality attributes and satisfies the needs and expectations of the users and clients4. Risk is the potential for loss or harm due to the occurrence of an undesirable event5. Testing can help to identify, analyze, prioritize, and mitigate the risks associated with the software product and project6.

C. Software testing identifies defects, which can be used to improve development activities, as they provide feedback on the quality of the software and the effectiveness of the development processes7. Defects are flaws or errors in the software that cause it to deviate from the expected or required results or behavior. Testing can help to detect, report, track, and resolve the defects, and prevent them from recurring in the future.

D. Performing a review of the requirement specifications before implementing the system can enhance quality, as it can ensure that the requirements are clear, complete, consistent, testable, and aligned with the needs and expectations of the users and clients. Requirements are the specifications of what the software should do and how it should do it. Testing can help to validate that the requirements are met by the software, and verify that the software is implemented according to the requirements.

References =

1 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 10

2 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 11

3 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 12

4 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 13

5 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 97

6 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 98

7 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 14

[8] ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 15

[9] ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 16

[10] ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 17

[11] ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 18

[12] ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 19

The test leader is the person who is responsible for planning, monitoring, and controlling the test activities and resources in a test project. The test leader should have the best knowledge of the test objectives, scope, risks, resources, schedule, and quality criteria. The test leader should also be aware of the test automation criteria, such as the execution frequency, the test support, the team education, the roles and responsibilities, and the devs and testers collaboration1. Based on these factors, the test leader can decide which tests are suitable for automation and which are not, and prioritize them accordingly. The test leader can also coordinate with the test automation engineers, the developers, and the stakeholders to ensure the alignment of the test automation strategy with the test project goals and expectations. References = ISTQB Certified Tester Foundation Level (CTFL) v4.0 Syllabus, Chapter 2, Section 2.3.1, Page 152; ISTQB Glossary of Testing Terms v4.0, Page 403; ISTQB Certified Tester Foundation Level (CTFL) v4.0 Syllabus, Chapter 6, Section 6.1.1, Page 514; Top 8 Test Automation Criteria You Need To Fulfill - QAMIND1

The correct outcome of a two-value boundary value analysis applied to the password length is the set of test cases represented by option D. Boundary value analysis is a test design technique that focuses on the values at the boundaries of an equivalence partition, such as the minimum and maximum values, or the values just above and below the boundaries. A two-value boundary value analysis uses two values for each boundary, one representing the valid value and one representing the invalid value. For example, if the valid range of values is from 4 to 7, then the two values for the lower boundary are 3 and 4, and the two values for the upper boundary are 7 and 8. The test cases in option D use these values for the password length, while also satisfying the other requirements of the password, such as containing at least one numeric character, one capital letter, and one lowercase letter. The test cases in option D are:

1RhT: a 4-character password that is valid

rSp53: a 5-character password that is valid

3N3e10: a 6-character password that is valid

8sBdby: an 8-character password that is invalid The test cases in the other options are incorrect, because they either use values that are not at the boundaries of the password length, or they do not meet the other requirements of the password. For example, the test cases in option A are:

1xA: a 3-character password that is invalid, but it does not contain a capital letter

aB11: a 4-character password that is valid

Pq1ZZab: a 7-character password that is valid

7iDD0a1x: an 8-character password that is invalid References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.2.1, Black-box Test Design Techniques1

ISTQB® Glossary of Testing Terms v4.0, Boundary Value Analysis, Equivalence Partition2

In the ISTQB terminology:

A defect (also known as a bug or fault) is an issue in the code that can cause a failure.

A failure is the observable incorrect behavior or output of the software due to a defect.

In this scenario, the memory leak is the defect in the application code that causes the application not to release dynamically allocated memory properly. The observable effect of this defect, which is the slowdown in response time, is considered a failure because it is the manifestation of the defect that prevents the application from meeting its performance requirements.

The "whole team approach" in Agile methodologies emphasizes collaboration and communication among all team members, including developers, testers, and business representatives. This approach fosters better relationships and effective collaboration, which ultimately benefits the project by leveraging diverse skills and perspectives. It helps ensure that everyone is aligned with the project's goals and quality standards, thus improving the overall effectiveness and efficiency of the team.

Test-Driven Development (TDD) includes refactoring as a key practice. After writing tests and the code to satisfy those tests, refactoring is performed to improve the code and test quality without changing the functionality. This continuous process helps maintain clean, efficient, and manageable code.

Test exit criteria are the conditions that must be fulfilled before concluding a particular testing phase. These criteria act as a checkpoint to assess whether we have achieved the testing objectives and are done with testing1. Test exit criteria are typically defined in the test plan document, which is one of the outputs of the test planning phase. The test plan document describes the scope, approach, resources, and schedule of the testing activities. It also identifies the test items, the features to be tested, the testing tasks, the risks, and the test deliverables2. According to the ISTQB® Certified Tester Foundation Level Syllabus v4.0, the test plan document should include the following information related to the test exit criteria3:

The criteria for evaluating test completion, such as the percentage of test cases executed, the percentage of test coverage achieved, the number and severity of defects found and fixed, the quality and reliability of the software product, and the stakeholder satisfaction.

The criteria for evaluating test process improvement, such as the adherence to the test strategy, the efficiency and effectiveness of the testing activities, the lessons learned and best practices identified, and the recommendations for future improvements.

Therefore, the test plan document is the most appropriate test document to find the test exit criteria described. The other options, such as test design specification, project plan, and requirements specification, are not directly related to the test exit criteria. The test design specification describes the test cases and test procedures for a specific test level or test type3. The project plan describes the overall objectives, scope, assumptions, risks, and deliverables of the software project4. The requirementsspecification describes the functional and non-functional requirements of the software product5. None of these documents specify the conditions for ending the testing process or evaluating the testing outcomes. References = ISTQB® Certified TesterFoundation Level Syllabus v4.0, Entry and Exit Criteria in Software Testing | Baeldung onComputer Science, Entry And Exit Criteria In Software Testing - Rishabh Software, Entry and Exit Criteria in Software Testing Life Cycle - STLC [2022 Updated] - Testsigma Blog, ISTQB® releases Certified Tester Foundation Level v4.0 (CTFL).

Cost can be regarded as an exit criterion for testing, because it is a factor that affects the profitability and feasibility of the software product. Testing is an investment that aims to improve the quality and reliability of the software product, but it also consumes resources, such as time, money, and human effort. Therefore, testing should be planned and executed in a way that balances the cost and benefit of testing activities. Having cost as an exit criterion helps to avoid spending too much money on testing, which may result in an unprofitable product or a loss of competitive advantage. Cost can also help to prioritize and focus the testing efforts on the most critical and valuable features and functions of the software product. However, cost should not be the only exit criterion for testing, as it may not reflect the true quality and risk level of the software product. Other exit criteria, such as defect rate, test coverage, user satisfaction, etc., should also be considered and defined in the test plan.

The other options are incorrect, because they either deny the importance of cost as an exit criterion, or they make false or unrealistic assumptions about the cost of testing. Option B is incorrect, because the financial value of product quality can be estimated, for example, by using cost-benefit analysis, return on investment, or cost of quality models. Option C is incorrect, because going by cost as an exit criterion does not necessarily constrain the testing project or help achieve the desired quality level. Cost is a relative and variable factor that depends on the scope, complexity, and context of the software product and the testing project. Option D is incorrect, because the cost of testing can be measured effectively, for example, by using metrics, such as test effort, test resources, test tools, test environment, etc.

Experience-based testing techniques are adopted for several reasons, most importantly because they can identify defects that might be missed by more systematic approaches like black-box and white-box testing. While systematic techniques follow predefined procedures and cover specific criteria, experience-based techniques leverage the tester's knowledge, intuition, and experience, which can be especially effective in uncovering subtle and complex issues.

Experience-based testing techniques include methods such as error guessing and exploratory testing. These methods rely on the tester’s background and intuition to predict where defects might be located and how the system might fail. These techniques are particularly useful in situations where the requirements and specifications are incomplete or ambiguous, and where creative and ad-hoc approaches can provide significant value.

Boundary Value Analysis (BVA)focuses on test cases at the edges of partitions because defects often occur at boundaries. The temperature ranges are:

≤7 (Too cold → W)

[8-21] (Standstill → X)

[22-29] (Ideal → Y)

≥30 (Too hot → Z)

Atwo-point BVAmeans testing both thelower and upper boundary valuesof each partition.

The correct selection{7,8,21,22,29,30}includes:

7 → Boundary of Too Cold (W)

8 → Lower boundary of Standstill (X)

21 → Upper boundary of Standstill (X)

22 → Lower boundary of Ideal (Y)

29 → Upper boundary of Ideal (Y)

30 → Lower boundary of Too Hot (Z)

This ensures maximum boundary coverage.