Summer Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: exc65

About load balancing, the following configuration is available: [USG] slb enable [USG]slb [USG-slb] rserver 1 rip 10.1.1.3 weight 32 [USG-slb] rserver 2 rip 10.1.1.4 weight 16 [USG-slb] rserver 3 rip 10.1.1.5 weight 32 [USG-slb] group test [USG-slb-group-test]metric srchash [USG-slb-group-test] add rserver 1 [USG-slb-group-test] add rserver 2 [ USG-slb-group-test] add rserver 3 Which of the following statements is correct?

A.

load balancing algorithm is a polling algorithm

B.

This configuration is a complete load balancing configuration

C.

determines which server the data stream should flow to based on the weight value. The smaller the weight value, the weaker the processing power of the corresponding real server.

D.

weight represents the weight of the real server

On the USG, you need to delete sslconfig.cfg in the hda1:/ directory. Which of the following commands can complete the operation?

A.

cd hda 1:/remove sslconfig.cfg

B.

cd hda 1:/delete sslconfig.cfg

C.

cd hda 1:/rmdir sslconfig.cfg

D.

cd hda 1:/mkdir sslconfig.cfg

In the IDC room, a USG firewall can be used to divide into several virtual firewalls, and then the root firewall administrator generates a virtual firewall administrator to manage each virtual firewall.

A.

TRUE

B.

FALSE

Configure the remote packet capture function on the USG to download the device to the device. You can use the FTP server to analyze the packet.

A.

TRUE

B.

FALSE

A user wants to limit the maximum bandwidth of the 192.168.1.0/24 network segment to 500M, and limit all IP addresses in the network segment to maintain a bandwidth of 1M. How should I configure a current limiting policy for this requirement?

A.

Configure per-IP traffic limiting. The maximum bandwidth of the host on the 192.168.1.0/24 network segment is 500M.

B.

Configure overall traffic limiting. The maximum bandwidth of the host on the network segment 192.168.1.0/24 is 1M.

C.

Configure the overall traffic limiting. The maximum bandwidth of the host on the 192.168.1.0/24 network segment is 500M.

D.

Configure the overall traffic limiting. The maximum bandwidth of the host on the network segment 192.168.1.0/24 is 500M. Then use the per-IP traffic limiting to ensure that the server bandwidth is 1M.

Which of the following methods is used to switch between active and standby links in the IPSec backup and backup system?

A.

hot standby

B.

link-group

C.

Eth-trunk

D.

ip-link

In Huawei's abnormal traffic cleaning solution, the characteristics of the straight-line deployment mode and the bypass deployment mode are correct.

A.

straight path deployment method requires separate deployment of detection equipment

B.

side deployment mode requires separate deployment of detection equipment

C.

bypass deployment mode is more flexible than the direct route deployment mode. You can use static drainage or dynamic drainage.

D.

Straight-line deployment mode Anti-DDoS device performs real-time drainage on all traffic passing through

The network administrator of a company discards traffic that exceeds the throughput of the device. The USG discards the traffic that exceeds the device throughput. The USG discards the traffic that exceeds the device throughput. The following command can achieve this function?

A.

utm bypass enable

B.

undo utm bypass enable

C.

ips bypass enable

D.

undo ips bypass enable

When using the Radius server to authenticate users, (the topology is as shown below), not only must the username and password be stored on the Radius server, but the username and password must also be configured on the firewall.

A.

TRUE

B.

FALSE

What actions will be performed when the firewall hot standby sends the active/standby switchover?

A.

send free ARP

B.

Send proxy ARP

C.

VRRP backup group virtual address is unavailable

D.

related switch automatically updates the MAC table