Customers that call into a company’s IVR report that when they try to select an option, none of the prompts work. The administrator determines that the calls are coming in across an H.323 gateway. While analyzing the dial peer that points toward Cisco UCM, the administrator notices that no DTMF method is configured. Which command resolves this issue?
Drag and drop the commands from the bottom to the blanks in the code to implement a translation rule to allow only 11 digits to be received over a SIP trunk to a SIP provider. The Cisco UCM is currently sending calls to the Cisco Unified Border Element in E. 164 format. Not all options are used.
Drag and drop the steps from the left into the order to provision mobility users through LDAP on the right. Not all options are used.
An administrator manages an environment with mobile users who commonly move between locations and take IP phones to remote sites. When mobile users are at one of the sites, users report issues with call quality, such as the audio cutting in and out. In addition, the affected area has a low bandwidth connection compared to other sites, so the administrator has put these devices in a region with an inter-region restriction of 8 kbps per call. Which feature must the administrator configure to mitigate the issue?
An engineer is troubleshooting an intersite call between two endpoints where the call fails and the message “Not Enough Bandwidth” is displayed. G.729 codec is in use on both sites. First, calls are being properly routed, and the issue happens after the third call is established and the bandwidth utilization between the two sites is under 50%. Which configuration in Cisco UCM must be adjusted to resolve the issue?
What is a capability of the gateway-preferred, network-based recording option in Cisco UCM?
An engineer is configuring Cisco UCME to support SIP endpoints. The engineer wants to limit the system to 20 SIP phones and 50 directory numbers. Which code completes this configuration?
Which elements does Cisco cloud mobility for collaboration include?
Alter a new SIP trunk is configured from a third-party SIP trunk provider, the call does not seem to work. A troubles hooting tool and a trace log from the Cisco Unified Border Element shows that there is communication with the provider and that it is sending out SDP information in the 2XX response. Why is the call not working?
An engineer is reviewing the dial peer configuration on the Cisco Unified Border Element after users reported that DTMF digits are not recognized when they make an outbound SIP call to a phone system that supports only out-of-band DTMF.
Which configuration under outbound dial peer resolves the issue?
