Free Practice Questions for Cisco 300-430 Exam

To separate different types of client authentication on a Cisco ISE deployment, policy sets and policy groups can be used. Policy sets allow the creation of policies based on conditions such as device type, while policy groups categorize clients for the application of specific policies. References: Cisco ISE documentation on policy sets and policy groups will have detailed information.

 For an enterprise wireless network with distributed offices globally and APs configured in FlexConnect mode, enabling FlexConnect local authentication is essential to support 802.11r and CCKM. This configuration allows for fast roaming and maintains a secure connection by locally authenticating the clients without having to go back to the central site, thus providing a seamless and efficient roaming experience for the users.

 In passive fallback mode for RADIUS, when the primary RADIUS server fails, the controller will start using the secondary RADIUS server. The default timer settings include an inactive timer, which, upon expiration, prompts the controller to attempt to send RADIUS requests back to the primary server. If the primary server is responsive, the controller will resume sending requests to it. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

Protocol Independent Multicast (PIM) sparse mode and dense mode are two different multicast routing mechanisms. Sparse mode uses distribution trees and is designed for networks where multicast groups are sparsely distributed across the network, minimizing unnecessary traffic. In contrast, dense mode floods the network with multicast traffic and then prunes back the branches where there are no interested receivers, which can lead to inefficient use of bandwidth. References := CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

To create an account for CLI access to an access point for troubleshooting, the WLC must be configured to allow user access with the capability to make changes. The ReadWrite User Access Mode enables an engineer to have full read and write access to the AP’s configuration via the CLI, which is necessary for performing troubleshooting tasks. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide.

 If all APs are receiving multicast traffic instead of only those that need it, it indicates that Multicast Internet Group Management Protocol (IGMP) snooping is not enabled. IGMP snooping is a feature that allows a network switch to listen to IGMP network traffic and ensure that multicast packets are only sent to the ports associated with interested receivers, thus preventing unnecessary traffic on the network. References := CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

The AAA override feature on a WLAN allows for individualized security policies to be applied to users after they are authenticated by the AAA server, which in this case is Cisco ISE (Identity Services Engine). The company policy requires that all users be denied access to any resources until they pass validation. By using AAA override, the network can enforce access control policies based on user credentials and group membership, ensuring that users cannot access network resources until they have been validated by Cisco ISE. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

 LDAP (Lightweight Directory Access Protocol) is a protocol used for accessing and maintaining distributed directory information services over an IP network. In the context of Cisco ISE (Identity Services Engine), LDAP can be utilized as a directory service to authenticate and authorize users during local web authentication processes. LDAP supports a wide range of directory services, including Microsoft Active Directory, which is commonly used in enterprise environments.

To ensure reliable streaming of video content on the wireless network between Cisco FlexConnect APs, Multicast Direct must be enabled. This feature allows for efficient multicast traffic delivery by converting multicast streams into unicast streams for each client, which guarantees delivery even in environments where reliable multicast is not feasible. References := CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide