Free Practice Questions for Cisco 300-430 Exam

To ensure that only admins have access to network device management while allowing guest users to reach the web portal, access to Cisco ISE must be permitted on the pre-authentication ACL. This configuration allows guests to interact with the portal without granting them broader network access.

The issue described indicates a problem with the 802.1X authentication policy on the authenticator, which is typically the wireless controller or access point. Even though the CA certificate is correctly installed on the laptop, if the authenticator’s policy is incorrectly configured or does not match the required settings for the corporate network, the user’s authentication attempts will fail. It is essential to review and correct the 802.1X policy settings on the authenticator to resolve this issue. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

The Cisco Aironet 600 Series OfficeExtend APs support various Layer 2 security options, including WPA+WPA2 and 802.1X. WPA and WPA2 provide secure encryption for wireless data, while 802.1X offers a robust authentication framework. These security options ensure that the wireless network is protected against unauthorized access and data breaches, which is crucial for remote workers connecting to the corporate network. References := CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

The issue with duplicate client entries from iOS clients with the private MAC address feature enabled can be resolved by breaking the high availability using the cmxha config disable command and upgrading the primary and secondary individually. This approach allows for each appliance to be upgraded without affecting the high availability pair’s synchronization and operation. References: The solution is supported by best practices for upgrading Cisco appliances in a high availability configuration, as outlined in the CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide.

The ‘aaa session-id common’ command is essential when implementing Cisco Identity Based Networking Services (IBNS) with downloadable ACLs on a Cisco Catalyst 3850 Series Switch. This command configures the switch to use a common session identifier for all AAA (Authentication, Authorization, and Accounting) transactions. This is important for downloadable ACLs because it ensures that the correct policies are applied consistently across different sessions and services.

 When configuring Cisco OfficeExtend Access Points (OEAPs), enabling NAT IP only for office-extend is necessary if the APs are behind a NAT device and need to communicate with the Wireless LAN Controller (WLC) using the internal IP management address. The command config flexconnect office-extend nat-ip-only enable allows the APs to discover and associate with the WLC when the management interface is configured with a NAT address.

To ensure reliable streaming of multicast video over a wireless link, it’s essential to optimize the multicast settings on the controller. Option B, implementing video-stream for the multicast video on the controller, is a feature that optimizes the delivery of multicast streams by converting them into unicast streams for specific clients, thus improving reliability. Option C, allowing multicast-direct to work correctly, involves enabling multicast-direct globally, which allows multicast packets to be sent directly to clients without the need for them to subscribe to a specific multicast group, enhancing efficiency and reliability. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

 FlexConnect is a wireless solution for branch office and remote office deployments. It allows APs to switch client data traffic locally and perform client authentication locally when they are disconnected from the WLC. For WLAN A to work in FlexConnect mode and WLAN B to work in local mode, the APs need to be part of a FlexConnect group with proper WLAN-VLAN mappings. This ensures that the correct VLAN is used for each WLAN, which is essential when the APs are operating in FlexConnect mode. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide.

In Cisco Prime Infrastructure, the report that must be created to present a list of all rogue APs with a high severity score to senior management is the “Rogue APs” report. This report provides detailed information about rogue access points detected in the network, including their severity score, which helps in assessing the potential risk they pose to the network security. References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide)