An engineer is deploying a Cisco wireless network to support branch offices. All APs are in FlexConnect mode, and the SSIDs switch traffic locally. The customer requires that all QoS for the VoWLAN service be based on Layer 2 markings. Which configuration is required on the switch ports that connect to the APs?
An engineer manages a Cisco Catalyst 9800 WLC with 500 APs connected. After enabling multicast, the controller experiences a spike in CPU overhead and overall network utilization. The engineer must configure the WLC so that multicast traffic is delivered efficiently to all APs without overloading the controller. Which feature should the engineer enable to implement this solution?
Refer to the exhibit. A university network administrator notices that wireless guest users consume a significant amount of uplink internet bandwidth in the library, which causes throughput issues on staff SSID. To throttle this bandwidth use, the administrator intends to configure a QoS policy for guests that:
Which class-map configuration must the administrator implement?



A Cisco WLC has been added to the network and Cisco ISE as a network device, but authentication is failing. Which configuration within the network device configuration should be verified?
After looking in the logs, an engineer notices that RRM keeps changing the channels for non-IEEE 802.11 interferers. After surveying the area, it has been decided that RRM should not change the channel. Which feature must be enabled to ignore non-802.11 interference?
What is characteristic of Multicast mode that affects the wireless network when configured on a Cisco WLC?
Refer to the exhibit A network engineer is using a Cisco Catalyst 9800 Series WLC to deploy a new wireless solution in a branch location Client traffic must be configured to break out locally Which code snippet must be added to the box in the code to complete the policy profile?


For security purposes, an engineer enables CPU ACL and chooses an ACL on the Security > Access Control Lists > CPU Access Control Lists menu. Which kind of traffic does this change apply to as soon as the change is made?
A company has a single WLAN configured for 802.1x authentication with the QoS set to Silver. This WLAN supports all corporate and BYOD access. A decision has been made to allow users to install Cisco Jabber on their personal mobile devices. Users report poor voice quality when using Jabber. QoS is being applied only as best effort. What must be configured to ensure that the WLAN remains on the Silver class and to ensure Platinum class for Jabber?
Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?