In reviewing your client's network needs for today and 5 years into the future, you note their current specs call for a 1Gb/s network within a campus environment, with little or no possibility of any increased bandwidth demands until they move to their planned future site. The building is not large, and the cable lengths will not exceed 550 m (1804 ft). Your recommendation for the fiber to be installed in the backbone is:
You have been asked to project manage a fiber cable backbone installation. In the course of the installation, you notice the fiber cable with a 25 mm (1 in) outside diameter is being installed into a small TR, and the cable is being installed into a tight corner. Based on your knowledge of minimum bend radius requirements for fiber cable, you must ensure that the MINIMUM cable bend radius of _______________ is provided when the cable installation is completed.
A backbone star topology shall have no more than______ level(s) of cross-connections.
Rack mounted hardware is installed in two standard sized racks or cabinets. Those sizes are:
The maximum vertical rise is the distance over which the cable is vertically self-supporting. This distance is a function of the weight of the cable and the:
If a telecommunications grounding busbar is installed in the telecommunications room (TR) with the identifier of 310, located on the third floor, then the telecommunications grounding busbar should be labeled as:
When labeling pathways, which one of the following guidelines should be met?
Color codes for cross-connections fields have been used for many years. Which color is used to identify horizontal cable?
Color codes for cross-connections fields have been used for many years. Which color is used to identify campus backbone?
Which class of the system was created to secure a single equipment room (ER)?
