Free Practice Questions for iSQI CTFL_Syll2018 Exam

The requirement given in the image specifies an additional fee of $3 that is charged during the weekend, with some exceptions and discounts based on the age of the visitors. To test this requirement, we can use boundary value analysis, which is a specification-based test technique that involves testing the values at or near the boundaries of an equivalence partition. An equivalence partition is a set of values that are expected to be treated in the same way by the system under test. For example, based on the requirement, we can identify the following equivalence partitions for the input age:

EP1: Age < 0 (invalid)

EP2: Age = 0 (valid, no charge)

EP3: 0 < Age < 7 (valid, no charge)

EP4: Age = 7 (valid, 20% discount)

EP5: 7 < Age < 13 (valid, 20% discount)

EP6: Age = 13 (valid, 20% discount)

EP7: 13 < Age < 65 (valid, full charge)

EP8: Age = 65 (valid, 50% discount)

EP9: Age > 65 (valid, 50% discount)

The boundary values for each equivalence partition are the values at or near the edges of the partition. For example, the boundary values for EP3 are 1 and 6. The boundary values for EP4 are 6 and 7. The boundary values for EP5 are 7 and 12. And so on.

To test this requirement using boundary value analysis, we need to select one value from each boundary and test it with different combinations of weekend and weekday. For example, we can select the following values:

BV1: Age = -1 (from EP1)

BV2: Age = 0 (from EP2 and EP3)

BV3: Age = 6 (from EP3 and EP4)

BV4: Age = 7 (from EP4 and EP5)

BV5: Age = 12 (from EP5 and EP6)

BV6: Age = 13 (from EP6 and EP7)

BV7: Age = 64 (from EP7 and EP8)

BV8: Age = 65 (from EP8 and EP9)

BV9: Age = 66 (from EP9)

We can then create test cases using these values and different combinations of weekend and weekday. For example:

TC1: Age = -1, Weekend = Yes -> Invalid input

TC2: Age = -1, Weekend = No -> Invalid input

TC3: Age = 0, Weekend = Yes -> No charge

TC4: Age = 0, Weekend = No -> No charge

TC5: Age = 6, Weekend = Yes -> No charge

TC6: Age = 6, Weekend = No -> No charge

TC7: Age = 7, Weekend = Yes -> $2.40 ($3 - 20% discount)

TC8: Age = 7, Weekend = No -> No charge

TC9: Age = 12, Weekend = Yes -> $2.40 ($3 - 20% discount)

TC10: Age = 12, Weekend = No -> No charge

TC11: Age = 13, Weekend = Yes -> $2.40 ($3 - 20% discount)

TC12: Age = 13, Weekend = No -> No charge

TC13: Age = 64, Weekend = Yes -> $3

TC14: Age = 64, Weekend = No -> No charge

TC15: Age = 65, Weekend = Yes -> $1.50 ($3 - 50% discount)

TC16: Age = 65, Weekend = No -> No charge

TC17: Age = 66, Weekend = Yes -> $1.50 ($3 - 50% discount)

TC18: Age =

66, Weekend = No -> No charge

Therefore, we need a minimum of 18 valid test cases to achieve 100% boundary value coverage based on input age.

$3.01 is not a valid output boundary value because it is not a possible output value based on the requirement. The output values can only be $0, $1.50, $2.40, or $3 depending on the input age and weekend status.

You can find more information about boundary value analysis in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 4, Section 4.2.

One of the basic principles of testing is that for a software system, it is not possible under normal conditions to test all input and output combinations because they are too many and too complex to cover within a reasonable time and budget. Therefore, testers have to select a subset of inputs and outputs that are representative and relevant for testing based on criteria such as requirements, risks, priorities, etc. This principle implies that testing cannot prove that a software system is defect-free or has a certain level of quality because there might be some untested inputs or outputs that could reveal defects or failures. Testing can only provide information about the quality and risk level of a software system based on the observed behavior and results under certain conditions and assumptions. You can find more information about the basic principles of testing in A Study Guide to the ISTQB® Foundation Level 2018 Syllabus, Chapter 11.

The most important report improvement is A. Add an impact analysis. An impact analysis is an assessment of how the defect affects the functionality, usability, performance, reliability, security, or other aspects of the system under test. An impact analysis can help prioritize and classify the defect based on its severity and urgency. An impact analysis can also help determine the root cause and possible solutions for the defect. An impact analysis is an essential part of a defect report because it provides useful information for decision-making and improvement processes.

The other report improvements are not as important as adding an impact analysis because they do not provide as much information or value for decision-making and improvement processes. For example:

B. Add information about which developer should fix the bug: This report improvement is not necessary because it is not part of the information that is required to describe, reproduce, and prioritize the defect. The assignment of developers to fix bugs is part of the defect management process, which involves assigning, tracking, resolving, and verifying defects.

C. Add the time stamp when the incident happened: This report improvement is not very useful because it does not provide much information about the cause or effect of the defect. The time stamp when the incident happened is only relevant if it is related to some external factors or events that could influence the behavior or performance of the system under test.

D. Add information about which web browser was used: This report improvement is not very relevant because it does not affect the functionality or usability of the system under test. The web browser used is only relevant if it is related to some compatibility or interoperability issues that could cause defects or failures in the system under test.

You can find more information about defect reports and impact analysis in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 5.

Test techniques are methods or procedures that can be used to design, execute, or evaluate test cases. Test techniques can be classified into two categories: specification-based and structure-based. Specification-based test techniques, also known as black-box test techniques, are based on the requirements, specifications, or expectations of the system under test. They do not require any knowledge of the internal structure or implementation of the system. Some examples of specification-based test techniques are use case testing, state transition testing, decision table testing, etc. Structure-based test techniques, also known as white-box test techniques, are based on the code, architecture, or design of the system under test. They require some knowledge of the internal structure or implementation of the system. Some examples of structure-based test techniques are control flow testing, data flow testing, branch testing, statement testing, etc. You can find more information about test techniques in A Study Guide to the ISTQB® Foundation Level 2018 Syllabus, Chapter 41.

The V-model is a development life cycle model that shows the relationship between each phase of development and its corresponding phase of testing. In this model, each level of testing (unit testing, integration testing, system testing, acceptance testing) has a corresponding level of development (component design, component integration, system design, requirements analysis). The model also shows that testing activities should start as early as possible in the development process and that each level of testing should be planned and designed in parallel with its corresponding level of development. Therefore, one of the roles of a tester in a software company that adopts the V-model is to coordinate the test strategy with the project managers who are responsible for planning and managing each phase of development. This role involves defining the scope, objectives, approach, resources, schedule, risks, and deliverables of each level of testing in alignment with the development plan and the project requirements. You can find more information about the V-model and test planning in Software Testing Foundations: A Study Guide for the Certified Tester Exam, Chapter 22.

A decision table is a specification-based test technique that involves creating a table that shows the combinations of inputs and outputs for a system under test based on certain conditions and rules. A decision table can be used to design test cases that cover all possible scenarios and outcomes for a system under test. Some statements about decision tables are:

I. Generally, decision tables are generated for low risk test items: This statement is false because decision tables can be generated for any level of risk test items depending on the complexity and variability of the system under test. Decision tables are especially useful for testing systems that have many inputs, outputs, conditions, and rules that affect their behavior or performance.

II. Test cases derived from decision tables can be used for component tests: This statement is true because decision tables can be used to design test cases for any level or type of testing, including component tests. Component tests are tests that verify individual components or units of software in isolation from other components or systems.

III. Several test cases can be selected for each column of the decision table: This statement is true because each column of the decision table represents a unique combination of inputs and outputs for the system under test based on certain conditions and rules. Therefore, each column can be used as a basis for selecting one or more test cases that cover that combination.

IV. The conditions in the decision table represent negative tests generally: This statement is false because the conditions in the decision table can represent both positive and negative tests depending on the requirements and expectations of the system under test. Positive tests are tests that verify that the system under test behaves as expected under valid or normal inputs or conditions. Negative tests are tests that verify that the system under test handles errors or exceptions gracefully under invalid or abnormal inputs or conditions.

You can find more information about decision tables in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 4, Section 4.2.

Beta testing is a type of acceptance testing that is normally performed by customers or potential customers at their own locations. Beta testing is done after the software product has passed the internal testing and quality assurance processes and is ready for release or deployment. Beta testing allows the customers or users to evaluate the software product in their real environment and provide feedback and suggestions for improvement. Beta testing can also help identify defects, compatibility issues, usability problems, or performance bottlenecks that might not have been detected during the internal testing. You can find more information about beta testing in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 2, Section 2.3.

Component testing is a part of the V-Model, which is a development life cycle model that shows the relationship between each phase of development and its corresponding phase of testing. In this model, each level of testing (unit testing, integration testing, system testing, acceptance testing) has a corresponding level of development (component design, component integration, system design, requirements analysis). Component testing is the process of testing individual components or units of software in isolation from other components or systems. Component testing verifies that the components meet their functional and non-functional requirements and work as expected in their intended environment. Component testing is usually done by developers who have access to the component design and code specifications. You can find more information about component testing and the V-Model in Software Testing Foundations: A Study Guide for the Certified Tester Exam, Chapter 22.

Testing has several objectives that aim to provide information and confidence about the quality and risk level of the software product and to support decision-making and improvement processes. Some of these objectives are:

Finding defects: Testing is the process of finding defects or failures in the software product that do not meet its requirements or expectations.

Providing information for decision-making: Testing is the process of providing information about the quality and risk level of the software product based on the observed behavior and results under certain conditions and assumptions. This information can help stakeholders make informed decisions about releasing, deploying, accepting, or improving the software product.

Gaining confidence about the level of quality of the software: Testing is the process of gaining confidence that the software product meets its requirements and expectations and provides value to the users and customers.

Analyzing and removing the cause of failures: Testing is not only the process of finding defects but also the process of analyzing and removing the cause of failures that lead to defects. This objective is related to debugging, which is a development activity that involves locating, diagnosing, and fixing errors in the code or design of the software product.

You can find more information about the objectives of testing in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 1, Section 1.2.

The extent of testing required for a software product or feature depends on several factors that influence the level of quality and risk involved in delivering or deploying it. Some of these factors are:

Budget to do testing: This factor indicates how much money is available or allocated for conducting the test activities, which affects the scope, depth, duration, and resources of testing.

Time available to do testing: This factor indicates how much time is available or allocated for conducting the test activities, which affects the schedule, frequency, speed, and coverage of testing.

Level of risk of the product or feature: This factor indicates how much impact or harm a failure or defect in the product or feature can cause to the users, customers, stakeholders, or environment, which affects the priority, intensity, complexity, and rigor of testing.

Complexity of the product or feature: This factor indicates how difficult or challenging it is to understand, design, implement, or maintain the product or feature, which affects the effort, skill, technique, and tool required for testing.

A particular tester involved in testing is not a deciding factor in determining the extent of testing required because it does not affect the quality or risk level of the product or feature being tested. Rather, it is an outcome or consequence of deciding how much testing is needed based on other factors such as budget, time, risk, and complexity. You can find more information about determining the extent of testing in Software Testing Foundations: A Study Guide for the Certified Tester Exam, Chapter 2, Section 2.12.