Free Practice Questions for VMware 3V0-22.25 Exam

Payment Card Industry Data Security Standard, PCI DSS, Compliance Standards

Defense Information Systems Agency, DISA, Security Standards

Center for Internet Security, CIS, Security Standards

The supported benchmarks from the provided list are PCI DSS , DISA , and CIS . VCF Operations compliance monitoring is accessed from Security > Compliance , where compliance scorecards are based on alert definitions with the Compliance subtype. The official VCF 9.0 documentation states that Regulatory Benchmarks display benchmarks for industry-standard regulatory compliance requirements and explicitly lists Defense Information Systems Agency (DISA) Security Standards , Payment Card Industry Data Security Standard (PCI DSS) Compliance Standards , and CIS Security Standards as supported regulatory benchmark options. DISA is available as a native pack, PCI DSS is listed as a regulatory compliance standard, and CIS is supported through a compliance pack from VMware Marketplace . FedRAMP and GDPR are not listed in the VCF Operations regulatory benchmark set shown in the guide. NIST is supported only as specific NIST SP 800-171 and NIST SP 800-53 R5 packs, not as the generic “NIST CyberSecurity Framework Security Baseline Standards” option shown in the question . Reference topic: Objective 4.16 – Monitor Security, Compliance and Configuration / Compliance Benchmarks / Regulatory Benchmarks .

The minimum requirements are to register VCF Operations in Connected Mode with the VCF Business Services console and activate Log Assist on a Unified Cloud Proxy . Log Assist is designed to generate support bundles, link them to Broadcom support cases, and attach diagnostic findings for troubleshooting. The official VCF 9.0 guidance states that before using Log Assist, the environment must be in Connected Mode , Log Assist must be activated on a unified collector, and inventory objects must be assigned to Log Assist . The setup workflow specifically instructs the administrator to go to License Management > Registration and register licenses in Connected Mode, then go to Administration > Control Panel > Cloud Proxies , select the collector, and choose Activate Log Assist . Log Assist uses the unified collector to collect and upload support bundles to the Broadcom Support Portal; legacy or Classic collectors do not support this capability . Disconnected mode cannot satisfy automatic support upload. Enabling vCenter log collection is a separate logging function and is not the minimum requirement for Log Assist. Reference topic: Objective 4.9 – Log Assist / Unified Collector / Connected Licensing / Support Case Uploads .

The correct administrative action is to clone the predefined dashboard and then modify the cloned copy. “Live! Heavy Hitters” is a predefined dashboard used to analyze shared infrastructure misuse and identify virtual machines with high activity against shared resources. Because it is delivered as predefined content, the supported customization pattern is not to directly edit the original dashboard, but to clone it and make changes to the copy. Broadcom’s dashboard documentation states that administrators can clone and edit predefined dashboards or create new dashboards from scratch. This preserves vendor-provided content while allowing operational teams to add site-specific widgets or metrics such as Cost | VM Cost Trend . Option A is not the best answer because changing ownership is used for ownership/sharing administration, not the preferred method for altering predefined dashboard content. Options B and C imply direct editing of the original dashboard, which is not the expected process for built-in dashboards. Option D is incorrect because exporting is used for portability or backup, not live customization. Reference topic: Objective 4.10 – Creating Custom Dashboards, Views and Reports in VCF Operations / predefined dashboards / clone and customize dashboard workflow .

The scheduled Reclaim action is created from the snapshot candidates visible at scheduling time, but execution still depends on the valid runtime state of each selected object. VCF Operations Reclaim supports scheduling snapshot reclamation from the Reclaim page; the administrator expands the cluster, selects one or more VMs or snapshots, and uses Schedule Action to run deletion later, with the job managed in Automation Central . The underlying delete snapshot action first retrieves snapshots based on age, then deletes selected snapshots, and the resulting task status is tracked in Recent Tasks . If a user reverts a VM to one of those snapshots before the scheduled job runs, that snapshot becomes part of the VM’s active rollback/current-state chain rather than an unused candidate that should be safely reclaimed. vSphere snapshot behavior requires caution because deleting a snapshot removes the ability to return to that snapshot state, and reverting changes the VM’s active snapshot relationship . Therefore, the reverted snapshot is not deleted, while the rest of the scheduled snapshot deletions can continue. The overall job is expected to finish as partially successful , reflecting that some selected objects were processed while the reverted snapshot was skipped or failed validation. Reference topic: Objective 4.2 – Reclaim Capacity / Snapshot Reclamation / Scheduled Actions / Automation Central .

The OUT_OF_SYNC state indicates that the configuration template state in VCF Operations no longer matches the corresponding state expected from Source Control. VCF Operations supports GitHub-based source control so configuration templates can be synchronized to and from a repository, and the documented sync workflow explicitly changes template status back to IN_SYNC after the administrator uses the Sync option in VCF Operations . A template can become out of sync when it is modified outside the VCF Operations workflow, such as being edited directly in the GitHub repository. It can also become out of sync if the corresponding template file is deleted from the repository, because VCF Operations can no longer reconcile the local template object with its source-controlled copy. If the source-control configuration itself is deleted, VCF Operations loses the configured repository association required to validate and synchronize templates. Removing a template from a policy or removing a vCenter instance from a drift-detection job affects drift evaluation scope, not Git template synchronization. Reference topic: Objective 4.16 – Configuration Drift / Source Control Integration / Syncing Configuration Templates with GitHub .

The administrator must configure the overcommit ratio and activate the appropriate custom profile at the datastore policy level. In VCF Operations, the Allocation Model is enabled from the policy Capacity card by unlocking Allocation Model and setting the overcommit ratio for CPU, memory, or disk space. For a Datastore , the allocation model specifically allows the administrator to set the overcommit ratio for datastore disk space, which controls how allocated storage capacity is calculated rather than relying only on demand-based usage . The second requirement is to use the current disk space usage of an existing VM to determine how many similar VMs can fit on the datastore. That is handled by a custom profile . Custom profiles define a hypothetical VM configuration and calculate VM remaining for objects such as datastores, datastore clusters, and cluster compute resources . The custom profile wizard also allows metric values to be copied from an existing object, including by VM name, vCenter, VM tag, or custom group . Peak utilization and capacity buffer do not enable allocation modeling or define VM-fit profiles. Reference topic: Objective 4.2 – Manage VCF Capacity / Allocation Model / Custom Profiles / Policy Capacity Settings .

CL-01 is using both Demand and Allocation capacity models. The Demand model is shown by GHz and physical memory capacity remaining, while the Allocation model is shown by allocated capacity values such as vCPUs and expanded memory capacity. VCF Operations states that the Allocation model is enabled in policy by setting overcommit ratios for Cluster Compute Resource CPU, memory, and disk space, and that the Capacity tab displays Demand by default and Allocation values when configured . CL-01 has 60 physical cores. It reports 300 vCPUs as the allocation basis, so the CPU allocation ratio is 300 ÷ 60 = 5:1 , not 4:1. This aligns with the documented allocation calculation where the vCPU count is derived from physical cores multiplied by the overcommit ratio . CL-01’s most constrained resource is CPU Allocation because only 30% of vCPU capacity remains, compared with 80% GHz remaining and 80% memory remaining. CL-02 shows only GHz and physical memory values, with no vCPU or allocation-expanded memory values, so the Allocation model is not enabled for CL-02. Reference topic: Objective 4.2 – Capacity Models / Allocation vs Demand / Overcommit Ratios / Capacity Remaining .

The correct selections are A, C, and E . For VCF Operations for Logs content-pack query design, Broadcom’s documented leading practice is to build portable and efficient message queries. Queries should not be tied to environment-specific attributes such as a particular hostname, source, or facility, because content-pack queries must work consistently across customer environments and not depend on local naming conventions ( TechDocs ). For performance, the query should use the least expensive matching method first: keywords , then globs , and only then regular expressions when the simpler forms cannot meet the requirement. Broadcom explicitly documents that query construction should follow this keyword-to-glob-to-regex progression ( TechDocs ). Regular expressions are the most expensive search type, so when regex or field operations are required, the query should include as many selective keywords as possible to reduce the event set before regex processing occurs ( TechDocs ). Splitting text filters into multiple lines or multiple regex expressions increases complexity and cost. Boolean restructuring alone does not replace proper keyword-first design. Reference topic: Objective 4.12 – VCF Operations for Logs / Content Packs / Message Query Best Practices .

The administrator should create a custom group , assign a common tag to the target VMs, and define the group membership criteria based on that tag. This satisfies the requirement for automatic updates because the group must be dynamic rather than manually maintained. VCF Operations supports custom object groups with either manual or dynamic membership. For dynamic groups, VCF Operations discovers objects that match the defined rules and keeps membership current as objects are added, removed, or changed . The custom group workspace allows the administrator to define membership criteria using object type, metrics, relationships, properties, object name, or tag . The documentation specifically identifies tag-based membership criteria as a supported method for creating dynamic custom groups . Because the VMs do not share a naming convention and are on different subnets, object name and network criteria are unsuitable. Adding each VM manually would create a static group, which would not automatically update when the application owner adds or removes VMs. Reference topic: Objective 4.5 – Managing VCF Operations with VCF Policy / Custom Groups / Dynamic Membership / Policy Assignment .