Free Practice Questions for RedHat RH302 Exam

This is boot related problem. There will be same questions repeated two times but problem is different.

First When you restart the system you will get the Error:

mount: error 15 mounting ext3

mount: error 2 mounting none

switchroot: mount failed: 22

umount /initrd/dev/: 2

Kernel Panic: no syncing: Attempted to kill init !

This error occurred in your system before showing welcome redhat linux. That means problem in grub boot loader.

Restart the System

Check the grub boot loader configuration by pressing e shortcut key.

You will see like:

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root= / rhgb quiet

initrd /initrd-2.6.9-5.EL.img

OR

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/root rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Then Edit Boot loader to make like

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/ rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Check all lines and edit as same as above. Press b to boot the system

After booting the system you should correct the /etc/grub.conf file.

Do the following steps as:

1.chmod g+s /storage

2.Verify using: ls -ld /storage

Permission should be like:

drwxrws--- 2 root sysusers 4096 Mar 16 18:08 /storage

If SGID bit is set on directory then who every users creates the files on directory group owner automatically the owner of parent directory.

To set the SGID bit: chmod g+s directory

To Remove the SGID bit: chmod g-s directory

Note: Examiner will provide you the Installation startup CD. And here mentioned size may vary see on the exam paper.

1.Insert the CD on CD-ROM and start the system.

2.In Boot: Prompt typelinux askmethod

3. It will display the Language, keyboard selection.

4. It will ask you for the installation method.

5. Select the HTTP from the list

6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use

Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.

7. It will ask for the Web site name and Redhat Enterprise Linux Directory.

Specify the HTTP Server: 192.168.0.254

Directory: rhel5Because Default Directory for http is /var/www/html

8. After Connecting to the HTTP Server Installation start. Go upto the partition screen by selecting the different Options.

9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question

10. Then select the MBR Options, time zone and go upto package selections.

It is another Most Important Time of installation. Due to the time limit, you should be

care about the installation packages. At Exam time you these packages are enough.

X-Window System

GNOME Desktop

(these two packages are generally not required)

Administration Tools.

System Tools

Windows File Server

FTP Servers

Mail Servers

Web Servers

Network Servers

Editors

Text Based Internet

Server Configuration Tools

Printing Supports

When installation will complete, your system will reboot. Jump for another Question.

Do the following steps as:

useradd username

passwd username

usermod -e “date”

example: usermod -e “12 Feb 2006” user4

Verify: chage –l user4

According to question, log server is already configured. We have to configure the mail, web and dns server for log redirection.

In mail, web and dns server:

1.vi /etc/syslog.conf

mail.*@logserveraddress

2.service syslog restart

mail is the facility and * means the priority. It sends logs of mail services into log server.

Do the following steps as:

1.vi /etc/cron.allow

root

or

vi /etc/cron.deny

Write all user name to deny.

/etc/cron.allow, /etc/cron.deny file is used to control users to allow or deny. If /etc/cron.allow file is created only that users are allowed to run cron schedule. Another way to deny to users is /etc/cron.deny write all user name on single line.

Do the following steps as:

1.useradd jeff

2.useradd marion

3.useradd harold

useradd command is used to create the user. All user’s information stores in /etc/passwd and user;s shadow password stores in /etc/shadow.

Do the following steps as:

usermod -G training user1

usermod -G training user2

usermod -G training user3

Verify from : cat /etc/group

There are two types of group, I) primary group II) Secondary or supplementary group.

Primary Group: Primary group defines the files/directories and process owner group there can be only one primary group of one user.

Secondary Group is used for permission. Where permission are defined for group members, user can access by belonging to that group.

Here user1, user2 and user3 belong as supplementary to training group. So these users get the permission of group member.

Do the following steps as:

Login as a root user

cat >schedule.txt

30 05 * * * /bin/echo “Hello”

3. crontab –u jeff schedule.txt

4. service crond restart

The cron system is essentially a smart alarm clock. When the alarm sounds, Linux runs the commands of your choice automatically. You can set the alarm clock to run at all sorts of regular time intervals. Alternatively, the at system allows you to run the command of your choice once, at a specified time in the future.

Red Hat configured the cron daemon, crond. By default, it checks a series of directories for jobs to run, every minute of every hour of every day. The crond checks the /var/spool/cron directory for jobs by user. It also checks for scheduled jobs for the computer under /etc/crontab and in the /etc/cron.d directory.

Here is the format of a line in crontab. Each of these columns is explained in more detail:

#minute, hour, day of month, month, day of week, command

*        *     *             *      *            command

Entries in a crontab Command Line

Field

Value

Minute

0-59

Hour

Based on a 24-hour clock; for example, 23 = 11 p.m.

Day of month

1-31

Month

1-12, or jan, feb, mar, etc.

Day of week

0-7; where 0 and 7 are both Sunday; or sun, mon, tue, etc.

Command

The command you want to run

Do the following steps as:

1.lvextend –L+200M /dev/test0/testvolume1

Use lvdisplay /dev/test0/testvolume1)

2.ext2online –d /dev/test0/testvolume1

lvextend command is used the increase the size of Logical Volume. Other command lvresize command also here to resize. And to bring increased size on online we use the ext2online command.