Free Practice Questions for RedHat RH302 Exam

Do the following steps as:

1.rpm –ivhftp://server1/example.com/pub/updates/zsh-*

or

1.Login to ftp server : ftpftp://server1.example.comusing anonymous user.

2.Change the directory: cd pub and cd updates

3.Download the package: mget zsh-*

4.Quit from the ftp prompt : bye

5.Install the package

6.rpm -ivh zsh-*

7.Verify either package is installed or not : rpm -q zsh

Do the following steps as:

vi /etc/sysconfig/network-scripts/ifcfg-eth0

DEVICE=eth0

BOOTPROTO=static

ONBOOT=yes

IPADDR=x.x.x.x

NETMASK=x.x.x.x

Enter the IP Address as given station number by your examiner: example: 172.24.0.1

Enter Subnet Mask

Enter Default Gateway and primary name server

press on ok

ifdown eth0

ifup eth0

verify using ifconfig

In the lab server is playing the role of router, IP forwarding is enabled. Just set the Correct IP and gateway, you can ping to 172.25.254.254.

Quotas are used to limit a user's or a group of users' ability to consume disk space. This prevents a small group of users from monopolizing disk capacity and potentially interfering with other users or the entire system. Disk quotas are commonly used by ISPs, by Web hosting companies, on FTP sites, and on corporate file servers to ensure continued availability of their systems.

Without quotas, one or more users can upload files on an FTP server to the point of filling a filesystem. Once the affected partition is full, other users are effectively denied upload access to the disk. This is also a reason to mount different filesystem directories on different partitions. For example, if you only had partitions for your root (/) directory and swap space, someone uploading to your computer could fill up all of the space in your root directory (/). Without at least a little free space in the root directory (/), your system could become unstable or even crash.

You have two ways to set quotas for users. You can limit users by inodes or by kilobyte-sized disk blocks. Every Linux file requires an inode. Therefore, you can limit users by the number of files or by absolute space. You can set up different quotas for different filesystems. For example, you can set different quotas for users on the /home and /tmp directories if they are mounted on their own partitions.

Limits on disk blocks restrict the amount of disk space available to a user on your system. Older versions of Red Hat Linux included LinuxConf, which included a graphical tool to configure quotas. As of this writing, Red Hat no longer has a graphical quota configuration tool. Today, you can configure quotas on RHEL only through the command line interface.

1. vi /etc/fstab

/dev/hda11/dataext3defaults,usrquota 1 2

2. Either Reboot the System or remount the partition.

Mount –o remount /dev/hda11 /data

3. touch /data/aquota.user

4. quotacheck –ufm /data

5. quotaon -u /data

6. edquota –u user1 /data

and Specified the Soft limit and hard limit on opened file.

To verify either quota is working or not:

Soft limit specify the limit to generate warnings to users and hard limit can’t cross by the user. Use the quota command or repquota command to monitor the quota information.

By Default system accept the logs only generated from local host. To accept the Log from other host configure:

vi /etc/sysconfig/syslog

SYSLOGD_OPTIONS="-m 0 -r"

Where

-m 0 disables 'MARK' messages.

-r enables logging from remote machines

-x disables DNS lookups on messages recieved with -r

service syslog restart

After completing the Boot loader problem, you will boot the system, but it goes to emergency mode. Remember that if System boots on Emergency mode that means file system problem.

You will get the Shell, remount the / filesystem with read and write mode.

1.First Find out the / filesystem using e2lable /dev/hda1, e2lable /dev/hda2 etc

2.mount –o remount,defaults /dev/hda? /

3.vi /etc/fstab

You will get like:

/root/ext3defaults 1 1

or //rootext3defaults 1 1

4.Edit the file like:

//ext3defaults 1 1

5.Configure the /etc/grub.conf file if just booting system by editing grub from grub prompt.

6.Reboot the system.

Do the following steps as:

Use fdisk /dev/hdaTo create new partition.

Type nFor New partitions

It will ask for Logical or Primary Partitions. Press l for logical.

It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.

Type the Size: +100MYou can Specify either Last cylinder of Size here.

Press P to verify the partitions lists and remember the partitions name.

Press w to write on partitions table.

Either Reboot or use partprobe command.

Use mkfs –t ext3 /dev/hda?

Or

mke2fs –j /dev/hda? To create ext3 filesystem.

vi /etc/fstab

Write:

/dev/hda?/dataext3defaults1 2

11. Verify by mounting on current Sessions also:

mount /dev/hda? /data

While you load the X Window System, you will get the problem. To troubleshoot follow the following steps:

1.Check the /tmp is full ?

2.Check your quota, hard limit is already crossed ?

3.Check xfs service is running ?

4.Boot the system on runlevel 3 and execute the system-config-display command

5.Edit the /etc/inittab to set default runlevel 5.

id:5:initdefault:

Very Easy question, nameserver is specified in question,

1.vi /etc/resolv.conf

nameserver 192.168.0.254

2.host server1.example.com

We can control the services for current session and for next boot time also. For current Session, we use service servicename start or restart or stop or status. For automatically on next reboot time:

chkconfig servicename on or off

eg: chkconfig nfs on

chkconfig portmap on

or

ntsysv

Select the nfs and portmap services.

Reboot the system and identify whether services are running or not.

Do the following steps as:

echo “1” >/proc/sys/net/ipv4/ip_forward

vi /etc/sysctl.conf

net.ipv4.ip_forward=1

/proc is the virtual filesystem, containing the information about the running kernel. To change the parameter of running kernel you should modify on /proc. From Next reboot the system, kernel will take the value from /etc/sysctl.conf.