Free Practice Questions for Nutanix NCP-MCI-6.10 Exam

Nutanix describes a special process for updating golden images or templates without modifying the original source object directly. The documentation states:

“Complete Guest OS Update creates a temporary, cloned instance of the template, boots it, and allows administrators to patch or update the operating system. Once updates are applied, the system recomposes the template with the modifications.”

This process ensures that templates remain clean and version-controlled while still allowing regular OS patching operations. Other options such as Create VM from Template merely instantiate running VMs and do not update the template source. Update Guest OS and Update Configuration refer to VM-level settings but do not create a temporary working copy for template lifecycle management.

Thus, Complete Guest OS Update is the correct feature.

Nutanix AHV networking documentation describes IGMP Snooping as a feature that enables the AHV virtual switch to learn which VMs have joined specific multicast groups through IGMP membership reports. The documentation states that with IGMP Snooping enabled, multicast traffic is forwarded only to VMs that are registered members of a multicast group, preventing unnecessary flooding of multicast packets across all ports. LACP is for NIC bonding, network segmentation is for isolating networks, and LLDP is for link layer device discovery. None of these selectively deliver multicast traffic. Only IGMP Snooping provides the optimized multicast forwarding described.

When a node is placed intoMaintenance Mode, Nutanix follows a structured process to ensureservice continuity and data integrity.

Option B (All eligible VMs on the host are migrated to other hosts) is correct:

Live Migration automatically moves VMs to other hoststo avoid downtime.

This ensures workloads remain operational during maintenance.

Option D (Non-migratable VMs are powered off) is correct:

Some VMs, such as those usingGPU pass-through or local storage dependencies,cannot be live-migrated.

These VMsmust be powered offbefore placing the host into Maintenance Mode.

Option A is incorrect:

Non-migratable VMs are not automatically restarted on other hosts—they remain powered off until manually restarted.

Option C is incorrect:

Eligible VMs are live-migrated, not powered off.

When creating templates in Nutanix, Prism Central supports two official, built-in guest customization frameworks depending on the operating system family.

The Nutanix guest customization documentation states:

“For Windows VMs, Prism Central supports Sysprep-based customization. For Linux VMs, Prism Central supports Cloud-init customization.”

These two tools allow automation of hostname assignment, networking configuration, user accounts, and post-deployment initialization.

Additional extracts from internal documentation:

“Sysprep is automatically invoked during clone operations from Windows templates to ensure that the cloned VM receives unique identifiers.”

“Cloud-init is used for Linux templates to allow dynamic provisioning, SSH key injection, and package installation during instantiation.”

Nutanix does not list “Custom Script” or “Guided Script” as valid VM template customization mechanisms. Scripting can be applied after deployment but not as a built-in template customization framework.

Thus, the only valid template customization options are Sysprep and Cloud-init.

Nutanix storage container configuration guidance specifies that “Advertised Capacity” is the setting used to define a maximum limit for the container. This value enforces a hard cap on space usage. Reserved Capacity, in contrast, defines a minimum guarantee of space for the container and does not limit growth.

Prism Element is the correct interface for creating storage containers with specific data reduction settings such as compression and deduplication, as the container-level storage policies are applied directly at the cluster’s storage layer.

The documentation further clarifies that RF1, inline compression, and deduplication settings are configured within Prism Element under container creation. Therefore, to enforce the 100 GiB limit, the administrator must create the container in Prism Element and set the Advertised Capacity to 100 GiB.

Understanding the Issue

The administrator is investigating VM performance complaints and is analyzing CPU Ready Time data.

CPU Ready Time is a crucial metric in Nutanix and virtualization environments (AHV, ESXi, or Hyper-V).

It measures the amount of time a VM is waiting for CPU scheduling due to resource contention.

High CPU Ready Time indicates that VMs are ready to run but are waiting because the host lacks available CPU resources.

Analysis of the Exhibit

The graph shows CPU Ready Time spikes for multiple VMs.

Some VMs have CPU Ready Time exceeding 18% to 21.5%, which is very high.

A healthy CPU Ready Time should be below 5%.

Values above 10% indicate CPU contention, and anything above 20% is critical and requires immediate troubleshooting.

Evaluating the Answer Choices

❌(A) Check the number of vCPUs assigned to each CVM. (Incorrect)

CVMs (Controller VMs) have fixed CPU allocation, and modifying their vCPU count is not recommended unless advised by Nutanix Support.

The issue is related to VM CPU contention, not CVM configuration.

✅(B) Review host CPU utilization. (Correct Answer)

High CPU Ready Time suggests CPU overcommitment or host saturation.

The administrator should check host CPU usage in Prism Central to determine if the cluster is overloaded.

If host CPU usage is consistently above 85–90%, VMs are competing for CPU resources, leading to high CPU Ready Time.

❌(C) Assess cluster SSD capacity. (Incorrect)

SSD capacity impacts storage performance (latency, read/write speeds) but does not affect CPU Ready Time.

High CPU Ready Time is a CPU scheduling issue, not a storage bottleneck.

❌(D) Enable VM memory oversubscription. (Incorrect)

Memory oversubscription does not impact CPU scheduling.

Enabling memory oversubscription affects RAM allocation, but CPU Ready Time is strictly related to CPU contention.

Next Steps to Diagnose & Resolve the Issue

Review Host CPU Utilization:

Navigate to Prism Central → Analysis → CPU Usage per Host.

Identify hosts experiencing high CPU load.

Check VM vCPU Allocation:

Ensure that VMs do not have excessive vCPUs assigned, which can lead to scheduling inefficiencies.

Overprovisioning vCPUs can cause unnecessary contention.

Balance Workload Across Hosts:

Use Nutanix AHV DRS (Dynamic Scheduling) or VMware DRS to redistribute VMs across hosts.

Check if certain hosts are overloaded while others have spare CPU capacity.

Consider Scaling Out the Cluster:

If CPU usage is consistently high, adding more nodes may be required to reduce CPU contention.

Multicloud Infrastructure References & Best Practices

CPU Ready Time Best Practices:

Keep CPU Ready Time below 5%.

Avoid overcommitting vCPUs on heavily loaded hosts.

Monitor Prism Central Runway Metrics to predict future CPU resource needs.

Nutanix AHV CPU Scheduling Optimization:

Ensure proper VM sizing (avoid excessive vCPU allocation).

Balance workloads using Nutanix AHV DRS.

To ensureVM high availability (HA) in the event of a node failure, the administrator mustenable HA Reservation (Option B)in Prism Element.

High Availability (HA) in Nutanix ensures that VMs restart on another available node if the host they are running on fails.

Option A (Redundancy Factor 3)affectsstorage redundancy, not VM failover.

Option C (Protection Domains)is related todisaster recovery (DR), not local HA failover.

Option D (RF1 Storage Container)would reduce fault tolerance and is not recommended for production environments.

The NCC alert indicates connectivity failure to the remote site. Resolving this involves confirming network connectivity and re-establishing the remote site configuration if necessary.

From theNutanix Enterprise Cloud Administration (ECA)course materials:

“The primary ports used for replication between clusters are 2009 (for Prism Element API) and 2020 (for data replication). Ensuring these ports are open and reachable is critical for remote site connectivity.”

Also:

“If the remote site has been re-imaged or reconfigured, it may have a new cluster incarnation ID. In such cases, the remote site configuration must be recreated to align with the current cluster information.”

Steps like checking ping with MTU 9000 (D) are not directly related to remote site connectivity for replication, and NAT configurations (B) are generally not recommended unless explicitly required.