Free Practice Questions for Netapp NS0-521 Exam

When using Foreign LUN Import (FLI) for migrating LUNs from third-party SAN arrays to a NetApp ONTAP system, one of the requirements is to have at least one Fibre Channel (FC) port configured in target mode on the destination NetApp ONTAP cluster. This configuration is necessary to facilitate the migration process as the target mode port will accept and manage incoming data from the source SAN arrays.

For additional details, refer to:

NetApp Documentation on FLI

For a two-node cluster serving iSCSI LUNs, it is recommended to createtwo iSCSI LIFs per node. This configuration provides redundancy and load balancing, ensuring that each node can handle failover scenarios effectively and maintain high availability for the iSCSI connections.

For more details, see:

NetApp Documentation on iSCSI LIF Configuration

To manage space automatically for a volume containing a LUN with fast-growing data, enabling automatic resizing on the volume is recommended. This feature allows the volume to grow dynamically as needed, accommodating the fluctuating data size without manual intervention. This helps in managing storage efficiently and ensures that the application has the required space.

For further details, refer to:

NetApp Documentation on Volume Management

NetApp Community Discussion on Automatic Resizing

The feature that enables simultaneous snapshots of multiple LUNs in different volumes isConsistency Groups. This feature ensures that snapshots taken across different LUNs and volumes are consistent with each other, making it possible to recover a consistent state across multiple storage objects.

For further information, refer to:

NetApp Documentation on Consistency Groups

For enabling jumbo frames on Cisco Nexus switches for NVMe over TCP with tagged VLANs, the following changes are required:

Modify the Cisco Nexus switches to use an MTU of 9216: Setting the MTU to 9216 ensures that the network can handle jumbo frames, reducing the number of packets needed for large data transfers and thus improving performance.

Modify the appropriate broadcast domain in NetApp ONTAP software to use an MTU of 9216: This setting must match the network configuration to ensure end-to-end support for jumbo frames, which is essential for optimizing performance in NVMe over TCP environments.

For additional information, refer to:

NetApp Documentation on NVMe over TCP

Cisco Documentation on Jumbo Frames

The likely cause for the disappearance of all snapshots after a ransomware attack that encrypted all files on the LUN is the Snapshot autodelete feature. When the volume becomes full due to the encryption, the autodelete feature removes older snapshots to free up space, preventing the volume from running out of space and ensuring write operations can continue.

For more information, see:

NetApp Documentation on Snapshot Autodelete

NetApp Community Discussion on Snapshot Deletion

In NetApp ONTAP 9.13.1, one of the automatic features that can be used with iSCSI isLIF failover. This feature ensures that in the event of a network failure or a node issue, the Logical Interface (LIF) will automatically fail over to another available port, maintaining connectivity and minimizing disruption to iSCSI traffic.

For more information, refer to:

NetApp ONTAP 9.13.1 Features

When moving a LUN between different HA pairs in the same SVM to prevent loss of connectivity, the reporting nodes must be modified. The reporting nodes configuration ensures that the initiator paths are properly updated to reflect the new physical location of the LUN. This prevents disruptions in connectivity by maintaining the correct pathing information for the host systems accessing the LUN.

For more details, refer to:

NetApp Documentation on LUN Management

When configuring an NVMe protocol-based NetApp ONTAP storage system in a SAN environment, a subsystem is used to configure the list of hosts. A subsystem in the NVMe context is an entity that groups NVMe namespaces (storage units) and presents them to the connected hosts. The hosts access these namespaces through the subsystem, allowing for efficient management and configuration of NVMe resources.

This configuration ensures that the appropriate hosts have access to the necessary namespaces for storage operations. This approach is critical in NVMe SAN environments to maintain high performance and manageability.

For further details, refer to:

NetApp Community - How to Configure NVMe/TCP​ (NetApp Community)​.

NetApp Documentation - NVMe Overview​ (NetApp)​.