Weekend Sale - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: sntaclus

Which of the following descriptions are correct?

A.

CD1 can access and process 2 channelized STM-1 services

B.

L12 interface board can be installed in the slot of OpiX PTN 1900

C.

EFG2 can provide 2 GE electrical ports

D.

L12 can provide 16 E1 interfaces

In order to support the self-opening of the base station, the DHCP Relay function is deployed in the PTN LTE bearer network. Which of the following descriptions is wrong?

A.

DHCP Relay is deployed on L2/L3 nodes

B.

The default relay hop count of DHCP Relay is 255

C.

DHCP server address can be configured with multiple

D.

Configure routing on the PTN to the DHCP router

Which of the following descriptions about routing loops is wrong?

A.

Routing loops may occur when different routing domains import routes from each other

B.

Routing loops can only be generated by dynamic routing protocols

C.

Routing loops prevent packets from reaching their destination correctly and cause link congestion

D.

The packet is routed circularly between two or more routers until the TTL is reduced to 0 and

discarded

Which of the following conditions can cause the board to insert the BDI maintenance signal back to the upstream site?

A.

The board reports R_LOS

B.

The board reports 0TU2_DEG

C.

The board reports 0TU2_L0F

D.

0DU2_PM_LCK

Plan the base station IP address network segment 10.1.1.0/26 Which of the following addresses can be used by the base station?

A.

10.1.1.0

B.

10.1.1 6̂2

C.

wira

D.

10.1.1.64

Which of the following network element forms supports the functions of branch and line, cross multiplexing between lines and lines, and service adding and dropping functions?

A.

Terminal Multiplexer

B.

Add/Drop Multiplexer

C.

Regenerative Repeater

D.

Digital cross-connect equipment

During the normal operation of the network, the service channel protected by ODUK SNCP generates a condition for triggering protection switching, and the service has been automatically switched to the protection channel. When the fault

of the working channel is eliminated, the service cannot be automatically restored to the working channel.

A.

The SNCP service type is inconsistent with the service scenario requirements

B.

Protection group 'Recovery Mode' is 'Non-Recovery'

C.

A small number of bit errors occur in the working channel

D.

Manual switching, locking switching or forced switching commands are implemented artificially

E.

When the working channel is normal, the business needs to delay the "waiting for recovery time" and then switch from the protection channel to the working

channel.

The router works on the third layer (network layer) of the TCP/IP protocol stack. Which of the following is the main job it completes?

A.

Binary Data Streaming

B.

Physical Media Access

C.

Addressing and Routing

D.

Establish turbulent-to-turbulent connections

In the chain networking of Huawei NG-SDH equipment, if the SCC board of a single station is faulty, the site and the downstream site cannot log in.

A.

True

B.

False

The pump laser is the energy source of the EDFA, and its function is to provide energy for the amplification of the optical signal. Which of the following wavelengths can be used as the output wavelength of the

pump source in the EDFA structure?

A.

980nm

B.

1510nm

C.

1480nm

D.

1310nm