Free Practice Questions for Huawei H19-424_V1.0 Exam

The maximum number of XSIC slots can reach 4.

The maximum number of WSIC slots can reach 4.

4 SIC slots.

Dual master control and double forwarding

Service slices must use SRv6 Policy tunnels, which can be strictly explicit or loose.

The whole network uses NCE-P to calculate the path of the slice network based on the affinity attribute to ensure the optimal path of the whole network and make full use of the link bandwidth while ensuring the service quality.

SRv6Policy tunnels are vertically deployed between districts, counties, cities, and provincial WANs to optimize traffic to improve bandwidth utilization and ensure service quality.

SRO6fPolicy tunnels can be carried in the default slice network or in a non-default slice network. For default slices, SRv6BE is preferred. Services with special requirements can also be carried through SRv6 policy tunnels.

Global services such as local load tuning and load balancing of the LeaderAP are limited by the performance of the AP, and the specifications of the APs that can be managed by theLeaderAP are limited

If the specifications are exceeded, if APs are not grouped, APs will be randomly grouped, and adjacent APs and APs on the same floor may be assigned to different groups, which will affect global services such as tuning and load balancing

AP groups in the current version are grouped through AP management VLANs, and APs in the same group need to have the same management VLANs

The AP tuning group division will be reflected on the controller of the current version

Configure access management

Configure a policy template

Create an external network

Create a fabric network

Configuration service exception. Contact maintenance engineere（netconf communication failed）

Service process faied

The service is abormal

Unrecongnizeinformation

NCE-Campus supports the configuration of firewall security group policies.

When a user passes the NCE-Campus authentication or the permission changes, NCE-Campus synchronizes the user name, IP-group, and IP address information to FW, and FW identifies all user groups based on the mapping relationship between IP address, user name, and IP-group, and executes the corresponding security group policy.

Reuse the current online behavior management process, and add lP-Group information to the synchronization information of NCE-Campus and firewall.

When the user goes online and ages in FW, FW actively queries the online user to the NCE-Campus server to keep the IP-Group and other information at both ends synchronized

It is recommended to deploy two-way tunnels to pass through the common road, which is convenient for maintenance and more reliable tunnel BFD detection

When optimizing and calculating routes, priority is given to ensuring the creation of high-priority tunnels, and high-priority tunnels can preempt low-priority tunnel resources

RSVP-TE, SR-TE, and LDP tunnels can be tuned

When multiple load-balancing tunnels are deployed between two PE nodes, we recommend that you deploy a detached group.

BGP-LS

Netstream

PCEP

Telemetry

Manually save the equipment configuration on the controller on a regular basis

Formulate regular configuration file backup tasks