The NetEco management system supports the function of user decentralization and domain division, which can realize that different operation and maintenance personnel can only view the equipment managed by themselves. For example, by assigning permissions, a
certain operation and maintenance personnel can only check the equipment information of the computer room of a few outlets. ()
UPS products such as APM and NXR need to be derated when the temperature is 30 degrees, and UPS5000-E does not need to be derated when the temperature is below 40 degrees.
The intelligent busway can replace the precision configuration cabinet and increase the number of IT cabinets
FusionModule2000 integrated UPS has two configurations of single-channel MCCB and dual-channel ATS. ( ).
The four remotes mentioned in the monitoring system refer to telemetry, remote signaling, remote adjustment, and remote control, and the corresponding monitoring signals are AI and DI. AO. DO these four signal types.
FusionModule800 closed aisle hot and cold aisle are optional
UPS5000-E (50kVA power module) single rack can accommodate up to 300kVA (
In the UPS5000 configuration, different battery schemes can be obtained by adjusting the number of battery groups and the number of battery cells in a single group
FusionModule500 uses natural heat dissipation ( ).
The integrated UPS rack frame is available in 50Kva and 125Kva ( ).
Huawei network management NetEco. supports southbound SNMP protocol ()
When you choose to only support temperature detection and do not support hot-plug configuration, the switches in the socket must be fully configured ()
The height of the UPS5000-E (25-75kVA) power module is only 2U.
AHU is the smallest module of 220kW under standard conditions and cannot be split
One of the highlights of UPS2000-G series products is high efficiency, which is the first UPS in the industry to pass the Energy Star certification.