Free Practice Questions for Fortinet EMEA-Advanced-Support Exam

TCP is a unicast, connection-oriented protocol that ensures reliable data delivery between two endpoints using sequence numbers and acknowledgments. Multicast, which sends data to multiple recipients, is supported by UDP, not TCP, due to TCP’s requirement for a direct connection. Fortinet devices handle multicast traffic via UDP-based protocols like IGMP or PIM. Exact extract: "TCP is a unicast protocol that establishes a reliable connection between two devices... Multicast traffic, such as streaming or group communications, relies on UDP, as TCP does not support multicast delivery."

Classful addressing follows the original IP address classes: Class A (/8), Class B (/16), and Class C (/24). Option A (10.225.30.0/8) is a Class A address, and C (172.16.0.0/16) is a Class B address. Option B (10.225.30.0/16) and D (172.16.0.0/24) use non-standard masks for their respective ranges, making them classless (CIDR). The original document incorrectly lists only A. Fortinet routing supports both classful and classless addressing. Exact extract: "Classful addressing uses fixed subnet masks: Class A (/8), Class B (/16), and Class C (/24)... Addresses like 10.0.0.0/8 and 172.16.0.0/16 are classful, while non-standard masks indicate classless addressing."

PAP (Password Authentication Protocol) sends username and password in clear text over the network, making it insecure. CHAP uses challenge-response with hash, MSCHAP is Microsoft variant with hash, EAP is extensible and can use various methods but not inherently clear text. Exact extract: It's "impossible" to authenticate wireless users based on EAP-PEAP sessions agains OpenLdap, except, if the users using clear text authetication methods (PAP). Clear text HTTP authentication is not secure. All user names and data (and, depending on the authentication style, passwords) are sent in clear text. If you ... Fortinet ... Password Authentication Protocol (PAP). Used to authenticate PPP connections. Transmits passwords and other user information in clear text. The default token page contains a "Token Code:" text field. Recommended customization. It's recommended to delete the "Token Code:" text. FortiWeb will use ... If you follow the configuration guide for NPS you'll see (step 9) you need to enable "Unencrypted authentication (PAP, SPAP)" (link below).

FortiGate operates on a default-deny principle; if a packet does not match any firewall policy, it is dropped to ensure security. No forwarding (A), IPS processing (C), or automatic allowing (D) occurs without a matching policy. Exact extract: "FortiGate uses a default-deny approach; packets that do not match any configured firewall policy are dropped to prevent unauthorized traffic."

When FortiGate detects a SYN flood attack, it applies rate limiting to SYN packets via a DoS policy, dropping excessive packets to mitigate the attack. It does not drop all packets (A), enable proxy inspection (B), or redirect traffic (D). Exact extract: "FortiGate mitigates SYN flood attacks using DoS policies, which apply rate limiting to SYN packets to prevent overwhelming the system."