Summer Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: exc65

examout.co

When creating a Consistency Group (CG), what is true of RecoverPoint/SE only?

A.

All volumes of the array are displayed in the available volumes list.

B.

Journal Compression may be used.

C.

The CG must be created from Unisphere for RecoverPoint.

D.

Journal volumes may be automatically provisioned.

What is the maximum number of VMAX splitters that can be added to a RecoverPoint cluster?

A.

2

B.

4

C.

5

D.

6

A Consistency Group consists of one production copy, one local copy, and two remote copies.

How many journals are required for this configuration?

A.

Four in total

B.

Two in total

C.

One for each remote copy and one for the local copy

D.

One for the production and one for each remote copy

You are adding an RPA to a cluster using Deployment Manager. What requirement must be satisfied before proceeding?

A.

Zoning and LUN masking must be known to be identical to the existing RPAs in the cluster.

B.

RPA iSCSI configuration settings must be known. All other zoning and LUN masking settings will automatically be read from the existing RPA site leader.

C.

RPA and array iSCSI configuration settings must be known. All other zoning and LUN masking settings will automatically be read from the existing RPA site leader.

D.

RPA and Storage iSCSI configuration settings will automatically be read from the cluster.

You are adding a VMAX array to a RecoverPoint/CL environment.

What needs to be done?

A.

Verify there is a zone that includes the RPA ports and the same VMAX front end ports that are zoned to the production host initiator.

B.

Verify that the 16 new gatekeepers are in the same storage group as the repository and journals. Add the RPA initiator and port groups to the masking view.

C.

After setting up the masking view use boxmgmt to log in to one of the site leader RPAs and be sure to tag all volumes that RecoverPoint is masked to – including the production and copy volumes.

D.

Verify that the VMAX is at Enginuity microcode 5876 or higher. After doing the LUN masking, enable Write-Protect ByPass (WPBP). Ensure that the proper license for the VMAX is installed on the RPAs.

In order to create a new Consistency Group, a user should navigate to which option within the Protection tab of Unisphere for RecoverPoint?

A.

Protect Volumes

B.

Manage Protection

C.

Deployment Manager

D.

Group Sets

Snap-based Replication requires the production volume of a Consistency Group to be on which array type?

A.

VNX

B.

VMAX

C.

VPLEX

D.

Isilon

When modifying a cluster's settings, what value can be changed from the Environment Settings screen in Deployment Manager?

A.

Cluster Name

B.

IP Type

C.

Cluster Management IP

D.

Additional Gateways

A VPLEX write splitter can be shared with how many RecoverPoint clusters?

A.

5

B.

6

C.

8

D.

10

A new RecoverPoint/SE environment has been installed with a single cluster. There are no limitations regarding journal sizes and you want to choose how frequently RecoverPoint can create point-in-time copies.

What is the highest frequency available for point-in-time copies in this environment?

A.

One per I/O

B.

One per sec.

C.

One per 500 µsec.

D.

One per 500 msec.