Free Practice Questions for CompTIA XK0-005 Exam

Rugged appliances are small appliances with ruggedized hardware that use Gaia embedded as their operating system. Gaia embedded is a version of Gaia that is optimized for embedded devices such as Rugged appliances and Quantum Spark appliances. Gaia embedded supports features such as VPN, firewall, identity awareness, application control, URL filtering, and anti-bot. Gaia embedded does not use Centos Linux, Gaia, or Red Hat Enterprise Linux version 5 as their operating system. References: Check Point Rugged Appliance Datasheet, page 1.

The firewall-cmd --zone=public --permanent --add-service=ssh command will resolve the issue by allowing SSH connections on port 22 in the public zone of the firewalld service. This command will add the ssh service to the permanent configuration of the public zone, which means it will persist after a reboot or a reload of the firewalld service. The firewall-cmd --zone=public --permanent --add-service=22 command is invalid, as 22 is not a valid service name. The systemct1 enable firewalld; systemct1 restart firewalld command will enable and restart the firewalld service, but it will not change the firewall rules. The firewall-cmd --zone=public --permanent --add-port=22/udp command will allow UDP traffic on port 22 in the public zone, but SSH uses TCP, not UDP. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 18: Securing Linux Systems, page 543.

The commands nslookup or host can be used to determine whether a hostname is in the DNS. The DNS is the domain name system, which is a service that translates domain names into IP addresses and vice versa. The nslookup command is a tool for querying the DNS and obtaining information about a domain name or an IP address. The host command is a similar tool that performs DNS lookups. Both commands can be used to check if a hostname is in the DNS by providing the hostname as an argument and seeing if the command returns a valid IP address or an error message. For example, the command nslookup www.google.com or host www.google.com will return the IP address of the Google website, while the command nslookup www.nosuchdomain.com or host www.nosuchdomain.com will return an error message indicating that the hostname does not exist. These commands will supply the information that is needed to determine whether a hostname is in the DNS. These are the correct commands to use for this task. The other options are incorrect because they do not query the DNS or obtain information about a hostname (rsync or netstat). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 12: Managing Network Connections, page 378.

To allow the same Kubernetes container configurations to be deployed in different environments without statically configuring custom locations, the engineer can use an ambassador container (D). An ambassador container is a proxy container that handles communication between containers and external services. It can dynamically configure locations based on environment variables or other methods. The other options are not related to this requirement. References:

[CompTIA Linux+ Study Guide], Chapter 11: Working with Containers, Section: Using Ambassador Containers

[How to Use Ambassador Containers]

The administrator should place the public keys for the server in the ~/.ssh/authorized_keys file. The SSH (Secure Shell) protocol is a method for establishing secure and encrypted connections between remote systems. The SSH protocol supports two types of authentication: password-based and key-based. Password-based authentication requires the user to enter the password of the remote system every time they connect. Key-based authentication requires the user to generate a pair of cryptographic keys: a public key and a private key. The public key is stored on the remote system, while the private key is kept on the local system. The public key and the private key are mathematically related, but not identical. The SSH protocol uses the keys to verify the identity of the user and establish a secure connection without requiring a password. The ~/.ssh/authorized_keys file is a file that contains the public keys of the users who are allowed to connect to the remote system using key-based authentication. The administrator should place the public keys for the server in this file, one per line, and set the appropriate permissions for the file. The administrator should also configure the SSH server to enable key-based authentication by editing the /etc/ssh/sshd_config file and setting the option PasswordAuthentication to no. The administrator should place the public keys for the server in the ~/.ssh/authorized_keys file. This is the correct answer to the question. The other options are incorrect because they are not the standard locations for the public keys for the server (~/.sshd/authkeys, ~/.ssh/keys, or ~/.ssh/keyauth). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 17: Implementing Basic Security, page 513.

To enable LUKS on a USB storage device with an ext4 filesystem format, the administrator needs to perform the following steps:

Unmount the device if it is mounted using umount /dev/sdc (D)

Create a partition table on the device using fdisk /dev/sdc (E)

Format the partition with LUKS encryption using cryptsetup luksFormat /dev/sdc1 (H)

Open the encrypted partition using cryptsetup luksOpen /dev/sdc1 LUKS0001

Create an ext4 filesystem on the encrypted partition using mkfs.ext4 /dev/mapper/LUKS0001 ©

Mount the encrypted partition using mount /dev/mapper/LUKS0001 /mnt References:

[CompTIA Linux+ Study Guide], Chapter 9: Securing Linux, Section: Encrypting Disks

[How to Encrypt USB Drive on Ubuntu 18.04]

The command ip addr add 10.0.6.5/24 dev enp1s0f1 will achieve the goal of temporarily assigning IP address 10.0.6.5/24 to the newly added network interface enp1s0f1. The ip command is a tool for managing network interfaces and routing on Linux systems. The addr option specifies the address manipulation mode. The add option adds a new address to an interface. The 10.0.6.5/24 is the IP address and the subnet mask in CIDR notation. The dev option specifies the device name. The enp1s0f1 is the name of the network interface. The command ip addr add 10.0.6.5/24 dev enp1s0f1 will add the IP address 10.0.6.5/24 to the network interface enp1s0f1, which will allow the administrator to copy data from another VLAN. This is the correct command to use to achieve the goal. The other options are incorrect because they either do not add a new address to an interface (echo "IPV4_ADDRESS=10.0.6.5/24" > /etc/sysconfig/network-scripts/ifcfg-enp1s0f1 or ifconfig 10.0.6.5/24 enp1s0f1) or do not use the correct syntax for the command (nmcli conn add ipv4.address-10.0.6.5/24 ifname enp1s0f1 instead of nmcli conn add type ethernet ipv4.address 10.0.6.5/24 ifname enp1s0f1). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 12: Managing Network Connections, page 385.

After installing a new version of a package that includes a configuration file that already exists on the system, such as /etc/httpd/conf/httpd.conf, RPM will create a new file with the .rpmnew extension instead of overwriting the existing file. This allows the administrator to review the default configuration that shipped with this version and compare it with the current configuration before deciding whether to merge or replace the files. The /etc/named.conf.rpmsave file is created by RPM when a package is uninstalled and it contains a configuration file that was modified by the administrator. This allows the administrator to restore the configuration file if needed. The /etc/named.conf file is the main configuration file for the BIND name server, not the httpd web server. The /etc/bind/bind.conf file does not exist by default in Linux systems. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 19: Managing Packages and Software, page 561.

The language that the playbook should be written in is YAML. YAML stands for YAML Ain’t Markup Language, which is a human-readable data serialization language. YAML is commonly used for configuration files and data exchange. YAML uses indentation, colons, dashes, and brackets to represent the structure and values of the data. YAML also supports comments, variables, expressions, and functions. Ansible is an open-source tool for automating tasks and managing configuration on Linux systems. Ansible uses YAML to write playbooks, which are files that define the desired state and actions for the systems. Playbooks can be used to automate the installation of patches on several Linux systems by specifying the hosts, tasks, modules, and parameters. The language that the playbook should be written in is YAML. This is the correct answer to the question. The other options are incorrect because they are not the languages that Ansible uses for playbooks (SQL, HTML, or JSON). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 18: Securing Linux Systems, page 549.