Free Practice Questions for Checkpoint 156-315.81 Exam

 In Logging and Monitoring, the tracking options are Log, Detailed Log and Extended Log. The option that can be added to each Log, Detailed Log and Extended Log is Accounting/Suppression. Accounting/Suppression is a feature that allows administrators to control how often logs are generated for certain rules or connections. Accounting means that logs are generated periodically based on a specified interval or volume. Suppression means that logs are generated only for the first and last packet of a connection or session. Accounting/Suppression can be added to any tracking option to reduce the number of logs and save disk space.

 The most ideal Synchronization Status for Security Management Server High Availability deployment is Synchronized. Security Management Server High Availability deployment is a feature that allows two or more Security Management Servers to provide redundancy and load balancing for managing security policies and logs. Synchronization Status is a parameter that indicates how up-to-date the databases of the Security Management Servers are with each other. Synchronization Status can have one of the following values: Synchronized, Lagging, Never been synchronized, or Collision. Synchronized means that the databases of all Security Management Servers are identical and have no conflicts. This is the most ideal status as it ensures consistency and reliability of security management. Lagging means that one or more Security Management Servers have not received all the updates from other Security Management Servers, and their databases are outdated. Never been synchronized means that one or more Security Management Servers have never synchronized their databases with other Security Management Servers, and their databases are independent. Collision means that one or more Security Management Servers have received conflicting updates from other Security Management Servers, and their databases have discrepancies. 

After trust has been established between the Check Point components, the Security Gateway IP address cannot be changed without re-establishing the trust. This is because the trust is based on the Secure Internal Communication (SIC) mechanism, which uses certificates to authenticate and encrypt the communication. The certificates are issued by the Internal Certificate Authority (ICA) of the Security Management Server / Domain Management Server, and contain the name and IP address of the component. Therefore, if the IP address of a component is changed, the certificate will become invalid and the trust will be lost. To restore the trust, the certificate must be renewed or reissued by the ICA12.

However, there are some exceptions to this rule. The Security Gateway name can be changed in command line without re-establishing trust, as long as the IP address remains the same. This is because the SIC mechanism does not rely on the hostname, but on the IP address and the SIC name (which is usually derived from the hostname, but can be manually changed). The Security Management Server name can be changed in SmartConsole without re-establishing trust, as long as the IP address remains the same. This is because SmartConsole uses a different mechanism to connect to the Security Management Server, which does not depend on the SIC certificate. The Security Management Server IP address can be changed without re-establishing trust, as long as some steps are followed to update the Check Point Registry file on the managed Security Gateways / Cluster Members / VSX Virtual Devices. This is because the Registry file contains the IP address of the ICA, which is used for certificate renewal. If the Registry file is not updated, then the certificate renewal will fail and the trust will be lost3.

References: 1: Check Point R81 Security Administration Guide - Check Point Software, page 162 2: Check Point R81 Security Engineering Guide - Check Point Software, page 162 3: How to renew SIC after changing IP Address of Security Management Server - Check Point Software, Solution ID: sk103356

Secure Network Distributor (SND) is a relevant feature of the Security Gateway because it is used to distribute packets among Firewall instances. SND is a technology that improves the performance and scalability of the Security Gateway by using multiple cores to handle concurrent connections. SND consists of two components: SND driver and Firewall instances. SND driver is responsible for receiving packets from network interfaces and distributing them to Firewall instances based on a load balancing algorithm. Firewall instances are responsible for inspecting packets according to security policies and forwarding them to their destinations. The other options are either incorrect or not related to SND.

According to the Check Point website, Capsule Connect and Capsule Workspace both offer secured connection for remote users who are using their mobile devices. However, there are differences between the two. For credential protection, Connect uses One-time Password login support and has no SSO support, whereas Workspace offers both One-Time Password and certain SSO login support. The other statements are either false or partially true. References: Capsule Connect and Capsule Workspace

 For Stateful Mode configuration, chain modules marked with 2 will not apply. Stateful Mode configuration is a feature that allows administrators to define how packets are processed by different firewall kernel modules in inbound and outbound directions. Chain modules are firewall kernel modules that perform various security functions, such as VPN, IPS, QoS, etc. Each chain module is associated with a key, which specifies the type of traffic applicable to the chain module. The key can be one of the following values: 0 for all packets, 1 for stateful packets, 2 for stateless packets, and 3 for no match packets. For Stateful Mode configuration, only chain modules with key 0 or 1 will apply, as they handle all packets or stateful packets. Chain modules with key 2 will not apply, as they handle stateless packets, which are not relevant for Stateful Mode configuration.

The valid range for VRID value in VRRP configuration is 1 - 255. VRID stands for Virtual Router ID, and it is a number that identifies a virtual router in a VRRP cluster. A VRRP cluster consists of one or more routers that share a virtual IP address and provide redundancy and load balancing for network traffic. Each router in the cluster must have a unique VRID value, and the VRID value must match the VRID value configured on the interface that connects to the VRRP cluster. The VRID value can be any number from 1 to 255, inclusive. 

 The first thing that must be done if “fwm sic_reset” could not be completed is to change internal CA via cpconfig. Fwm sic_reset is a command that allows administrators to reset Secure Internal Communication (SIC) between Security Management Server and Security Gateways or other Check Point modules. SIC is a mechanism that ensures secure and authenticated communication between Check Point components by using certificates issued by an internal Certificate Authority (ICA). If fwm sic_reset fails, it means that there is a problem with the ICA or the certificates that prevents SIC from being reset. To resolve this problem, administrators need to change internal CA via cpconfig, which is a command that allows administrators to configure various settings on Security Gateways or Management Servers, including the ICA. Changing internal CA via cpconfig will create a new ICA with a new certificate, and allow SIC to be reset with the new certificate.

The correct statement about Security Gateway and Security Management Server failover in Check Point R81.X in terms of Check Point Redundancy driven solution is: Security Gateway failover is an automatic procedure but Security Management Server failover is a manual procedure. Security Gateway failover is a feature that allows a cluster of Security Gateways to provide high availability and load balancing for network traffic. If one Security Gateway fails or becomes unreachable, another Security Gateway in the cluster automatically takes over its role and handles the traffic without interrupting the service. Security Management Server failover is a feature that allows a backup Security Management Server to take over the role of the primary Security Management Server in case of failure or disaster. However, this feature requires manual intervention to activate the backup server and restore the database from a backup file. 

 The file that contains the host address to be published, the MAC address that needs to be associated with the IP address, and the unique IP of the interface that responds to ARP request is $FWDIR/conf/local.arp. Local.arp is a configuration file that defines static ARP entries for hosts behind NAT devices. This file allows the Security Gateway to respond to ARP requests for NATed hosts with the correct MAC address, and to publish the NATed IP address instead of the real IP address. The other files are either not related or not valid. 

The Access Control policy supports two policy layers. These are the Network layer and the Application & URL Filtering layer. The Network layer contains rules that control the network traffic based on the source, destination, service, and action. The Application & URL Filtering layer contains rules that control the application and web access based on the application, site category, and user identity12.

The Access Control policy can also use inline layers, which are sub-policies that are embedded within a rule. Inline layers allow more granular control over specific traffic or scenarios, such as VPN, Mobile Access, or different user groups13. However, inline layers are not considered as separate policy layers, but rather as extensions of the parent rule4.

Therefore, the correct answer is A. The Access Control policy supports two policy layers.

References:

1, Policy Layers in R80.x - Check Point CheckMates

2, Access Control policies, layers, and rules | Check Point Firewall …

3, Chapter 8: Introduction to Policies, Layers, and Rules - Check Point …

4, Creating an Access Control Policy - Check Point Software

A star community is a VPN topology where one or more satellites connect to a center gateway. The center gateway can be a Security Gateway or a Security Management Server. The VPN routing option determines how the traffic is routed between the satellites and the center, and between the satellites themselves. There are three VPN routing options available in a star community12:

To center only: The satellites can only communicate with the center gateway, and not with each other or with any other VPN targets. This option is useful for remote access clients that only need to access resources on the center gateway.

To center, or through the center to other satellites, to Internet and other VPN targets: The satellites can communicate with the center gateway, and also with other satellites, Internet hosts, and other VPN targets through the center gateway. This option is useful for branch offices that need to access resources on the center gateway, as well as on other branch offices, Internet hosts, and other VPN targets.

To center and to other satellites through center: The satellites can communicate with the center gateway, and also with other satellites through the center gateway. However, they cannot communicate with Internet hosts or other VPN targets. This option is useful for branch offices that need to access resources on the center gateway and on other branch offices, but not on Internet hosts or other VPN targets.

Therefore, the options A (To satellites through center only) and D (To center only) are not valid VPN routing options in a star community.

References: 1: Remote Access VPN R81.20 Administration Guide - Check Point Software, page 13 2: Gaia R81.20 Administration Guide - Check Point Software, page 1030

Nothing needs to be done to get SIC to work if there is a Geo-Protection policy blocking Australia and a network requires a Check Point Firewall to be installed in Sydney, Australia. SIC stands for Secure Internal Communication, and it is a mechanism that ensures secure and authenticated communication between Check Point components by using certificates issued by an internal Certificate Authority (ICA). SIC is not affected by Geo-Protection policy, which is a feature that allows administrators to block or allow traffic based on the geographic location of the source or destination IP address. Geo-Protection policy only applies to data traffic, not control traffic, and SIC uses control traffic to establish trust between Check Point components. 

The responsibility of SOLR process on R81.20 management server is to generate indexes of data written to the database. SOLR is an open source search platform that provides fast and scalable indexing and querying capabilities. SOLR is used by the R81.20 management server to index data such as logs, objects, policies, tasks, and events, and to enable quick and efficient searches on this data by SmartConsole and SmartView applications.