Summer Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: exc65

You have recently changed the passphrase used with WPA2 in several APs and have reconfigured clients for

the new passphrase. Now, a few clients are unable to connect to those APs. Most clients can connect to them

just fine. What is the likely problem?

A.

The APs have the wrong new passphrase

B.

The working clients have the wrong passphrase

C.

The problem clients are not 802.11-capable

D.

The problem clients have the wrong passphrase

A user reports that his laptop was rebooted this morning and now he cannot connect to the WLAN. No other users are reporting connection problems in his work areA. No network configuration changes have been made.

Which one of the following is the most likely issue?

A.

The driver was updated and the new version is problematic

B.

The network SSID has changed

C.

Wrong passphrase entered for WPA2 on his laptop

D.

The AP is not allowing his laptop onto the network because it was rebooted and the reboot changed the MAC address

Which one of the following is a non-deprecated security solution in the 802.11 standard?

A.

WEP

B.

CCMP/AES

C.

TKIP/RC4

D.

Shared Key Authentication

What is a common problem in specialty Wi-Fi devices?

A.

The use of 802.11 VHT-only chipsets

B.

The use of older, less capable 802.11 chipsets

C.

The use of 802.11 DSSS-only chipsets

D.

The use of newer, more capable 802.11 chipsets

What can occur when two copies of a signal wave arrive at the receiver at the same time, but 180 degrees out

of phase which each other?

A.

Increased signal amplitude

B.

Bits may be added to the total count

C.

Increased signal strength

D.

Signal nulling or cancellation

What can be configured in some client devices to encourage them to use 5 GHz APs whenever they are

available?

A.

Band preference

B.

Gaming mode

C.

Band selection

D.

Roaming aggressiveness

An AP has two Ethernet ports on the back and another port that looks similar to an Ethernet port. For most

enterprise APs, how many of these ports can be used for Power over Ethernet (PoE)?

A.

1

B.

3

C.

0

D.

2

What is the maximum power that an 802.3at Power over Ethernet (PoE) injector can output in the Ethernet

interface?

A.

30 W

B.

15.4 W

C.

12.95 W

D.

25.5 W