Free Practice Questions for VMware 2V0-33.22PSE Exam

A distributed switch is managed by vCenter Server for all ESXi hosts associated with the distributed switch. A standard switch is different from a distributed switch in that standard switches contain VMkernel ports, but the entire configuration is managed by each ESXi host. A distributed switch is managed by vCenter Server for all ESXi hosts associated with the distributed switch and can contain multiple VMkernel ports. Each ESXi host can have multiple distributed switches configured at any time.

The two incident management services included in the VMware Cloud on AWS Service Management process are Incident Management and Capacity Management.

Incident Management is responsible for detecting, classifying, and resolving incidents quickly and effectively. It includes monitoring and alerting, incident response, and problem management. Capacity Management is responsible for predicting, measuring, and managing the capacity of the infrastructure. It includes capacity planning, performance analysis, and resource optimization.

References: [1] https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/cloud-management/vmware-cloud-on-aws-service-management-process.pdf [2] https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws.admin.doc/GUID-684D1A84-C57F-4EC1-8A18-7A9A9EB9B7FF.html

https://docs.vmware.com/en/VMware-vSphere/7.0/vmware-vsphere-with-tanzu/GUID-4D0D375F-C001-4F1D-AAB1-1789C5577A94.html

Tanzu CLI is a command-line interface used to create, scale, upgrade, and delete workload clusters that are part of the Tanzu Kubernetes Grid [1]. Tanzu CLI also allows you to manage the components of the Tanzu Kubernetes Grid [1], such as the Tanzu Kubernetes cluster and the Tanzu Supervisor cluster. It also provides access to the Tanzu Kubernetes Grid extensions [1], which allow you to extend the functionality of the Tanzu Kubernetes cluster.

https://docs.vmware.com/en/VMware-Tanzu-CLI/index.html

https://www.nakivo.com/blog/vmware-snapshots-vsphere-how-to/#title-12

Follow these recommendations to get the best performance when using snapshots:

· Use snapshots as a temporary measure only.The presence of snapshots can have a significant impact on guest application performance, especially in a VMFS environment, for I/O intensive workloads. The guest applications fully recover performance after snapshots are deleted.

· Keep the snapshot chain length short when possible, to minimize the guest application performance impact.Performance degradation is higher as the snapshot chain length increases.

· If you need to increase the size of a virtual disk that has snapshots associated with it, you must delete the snapshots first before you can increase the virtual disk's size.

For migrating a virtual machine using VMware vSphere vMotion from an on-premises data center to VMware Cloud on AWS SDDC, specific network requirements must be met. A Layer 2 connection (B) ensures that VMs can retain the same IP address and network settings post-migration, facilitating seamless migration without the need for reconfiguration. AWS Direct Connect (C) establishes a dedicated network connection between the on-premises data center and AWS, providing a more reliable and consistent network experience compared to internet-based connections. This setup is crucial for high-bandwidth, low-latency connections required by vMotion to efficiently transfer VM memory and state information during migration.

Compute Gateway (CGW) The CGW is a Tier 1 router that handles network traffic for workload VMs connected to routed compute network segments. Compute gateway firewall rules, along with NAT rules, run on the Tier 0 router. In the default configuration, these rules block all traffic to and from compute network segments (see Configure Compute Gateway Networking and Security).

https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/vmc-on-aws-networking-security.pdf

The CGW is a Tier 1 router that handles network traffic for workload VMs connected to routed compute network segments. Compute gateway firewall rules, along with NAT rules, run on the Tier 0 router.

https://blogs.vmware.com/cloud/2019/07/02/dhcp-dhcp-relay-vmware-cloud-aws/

To create a new network segment in the software-defined data center that utilizes the corporate DHCP server to provide IP addresses, the proper sequence is to create a DHCP relay profile, create a new segment attached to the Tier-1 gateway, and configure the segment DHCP config to utilize the new DHCP relay profile1. This is because the DHCP relay profile contains the IP address of the external DHCP server and the DHCP relay agent that forwards the DHCP requests and responses between the segment and the DHCP server1. The segment must be attached to the Tier-1 gateway, which is the edge device that provides routing and firewall services for the segment2. The segment DHCP config allows the administrator to specify the DHCP type, the DHCP relay profile, and the DHCP options for the segment3. References: 1: Configure Segment DHCP Properties - VMware Docs, 2: Create or Modify a Network Segment - VMware Docs, 3: Segment DHCP Config - VMware Docs

RAID-1 is a mirror configuration that provides high availability by creating multiple copies of a VMDK. RAID-5 and RAID-6 are erasure coding configurations that provide fault tolerance by distributing data and parity across multiple hosts.

The number of failures to tolerate (FTT) determines how many copies or parity blocks are created for each VMDK. For example, RAID-1 FTT = 2 means that there are three copies of each VMDK.

Therefore, based on your requirements, a possible VM storage policy setting could be RAID-1 FTT = 2, which would provide redundancy at the highest level possible with six hosts.

https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-EDBB551B-51B0-421B-9C44-6ECB66ED660B.html