Free Practice Questions for SolarWinds SCP-NPM Exam

 Packet loss is a measure of how many packets are lost or discarded during transmission over a network. Packet loss can cause network performance issues such as slow response time, jitter, and degraded voice quality. NPM can monitor packet loss on nodes and interfaces using ICMP ping or SNMP statistics. You can review the packet loss metrics on the Node Details or Interface Details views, or create a custom chart or report to compare packet loss across multiple nodes or interfaces. By reviewing the packet loss on the nodes on either side of the connection, you can identify which node or interface is experiencing the problem and troubleshoot the root cause. You can also use the Performance Analysis dashboard (PerfStack) to correlate packet loss with other metrics such as response time, CPU load, memory usage, buffer misses, and interface errors123. References:

Monitor packet loss in NPM - SolarWinds

Troubleshoot intermittent network slowdowns with NPM - SolarWinds

SCP Study Aid - SolarWinds (page 9)

Orion agents are software components that you can install on nodes to collect and send data to the Orion server. Orion agents do not require a separate license, as they are included in the license of the Orion Platform product that you are using, such as NPM. You can install and use as many agents as you need, as long as you do not exceed the number of licensed nodes, interfaces, or volumes for your product. Orion agents can use either agent-initiated or server-initiated communication, depending on your network configuration and security requirements. References: NPM Administrator Guide, page 67; SCP Study Aid - NPM, page 15.

When a router monitored by NPM reboots, the interface indexes may change, causing the interface statuses to become unknown in NPM. This is because NPM uses the interface indexes to identify and poll the interfaces. To resolve this issue, you need to remove the unknown interfaces from NPM and then run a list of resources on that node to discover the interfaces with the new index IDs. You can then add the interfaces back to NPM and resume monitoring them. References:

Allow Change the Interface Index - Forum - Network Performance Monitor (NPM) - THWACK Products

Edit interface properties in NPM - SolarWinds

SCP Study Aid - SolarWinds (page 6)

SNMP (Simple Network Management Protocol) is a protocol that allows network managers to monitor and control network devices using a set of standardized messages and data structures. SNMP uses a client-server model, where the network manager (client) sends requests to the network device (server) and receives responses. The network device has an SNMP agent that collects and reports the data using a MIB (Management Information Base), which is a hierarchical database of variables that describe the device’s status and configuration. Each variable in the MIB has a unique identifier called an OID (Object Identifier), which is a dot-separated sequence of numbers that follows a tree structure12.

To retrieve a single value in SNMP, you can use two types of requests: GET and GET NEXT. A GET request asks for the value of a specific OID, and the SNMP agent responds with the value if it exists, or an error if it does not. A GET NEXT request asks for the value of the next OID in the MIB tree, and the SNMP agent responds with the value and the OID of the next variable, or an error if there is no next variable. A GET NEXT request can be useful for discovering the OIDs and values of a device, or for iterating over a table of values34.

A GET VALUE request is not a valid SNMP request, and a GET TABLE request is not a single request, but a series of GET NEXT requests that retrieve all the values in a table . References: 1: SNMP Basics, 2: SNMP Tutorial Part 1 – Understanding MIBs and OIDs, 3: SNMP Tutorial Part 2 – SNMP Get, GetNext, GetBulk, 4: SNMP Commands, : SNMP Table Operations, : SNMP Table Retrieval

 Map status thresholds determine how the status of a map is calculated based on the status of its child objects. If you set the map status threshold to above 50%, it means that the map will be up if more than half of its child objects are up, regardless of the severity of the down objects. This can cause a situation where half of your objects in a nested map are down, but the top level map is up, because the top level map only considers the status of the nested maps, not the individual objects within them. To avoid this, you can lower the map status threshold to a value that reflects the desired level of availability for your network, or use custom map status thresholds to specify different values for different maps. References: Set map status thresholds in NPM, Create nested maps in NPM, How to map through a deeply nested array of objects?

 Device Studio is a feature in the SolarWinds Platform Web Console that allows you to create custom pollers for devices or technologies that are not supported by default in NPM. You can use Device Studio to create pollers for CPU and memory, as well as other metrics, by defining the object identifiers (OIDs) and formulas that you want to poll. Device Studio currently supports SNMP and WMI polling technologies, and you can test, assign, and edit your custom pollers from the Manage Pollers page. References: Create pollers in Device Studio for NPM, Device Studio, Device Studio Poller.

According to the SolarWinds Platform Agent requirements, the average resource consumption of an agent is less than 1% CPU, max 1 MB of memory, and 1 MB storage on the target computer. The agent software is designed to be lightweight and efficient, and does not impact the performance of the monitored devices. The other options are incorrect, as they either overestimate or underestimate the resource consumption of the agent, or imply that the agent does not use any local resources at all. References: SolarWinds Platform Agent requirements, section “SolarWinds Platform Agent resource consumption”.

 The easiest and fastest way to change the polling method for multiple nodes is to use the Manage Nodes feature in the web console. You can select up to 1000 nodes at a time and edittheir properties in bulk. You can choose the polling method from the available options, such as ICMP, SNMP, WMI, or Agent, and provide the required credentials or settings. This will apply the changes to all the selected nodes without affecting their existing data or alerts. References: Choose the polling method to use in the SolarWinds Platform; Polling Intervals - Best Practices; SOLARWINDS NETWORK PERFORMANCE MONITOR

The Discovery Ignore List is a feature that allows you to specify the IP addresses or hostnames of the devices that you do not want to monitor or discover in the future. You can add devices to the ignore list manually or automatically during the discovery process. Once a device is added to the ignore list, it will be skipped by any subsequent discovery. You can also remove devices from the ignore list if you change your mind and want to monitor them later. References: Add devices to the Discovery Ignore List in NPM, Remove devices from the Discovery Ignore List in NPM, How to View Devices on Your Windows Network and What to Do If You Can’t See Them