Weekend Sale - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: sntaclus

examout.co

What mechanism does Cascade Profiler use to identify the switch port a host is attached to and the hosts associated MAC address?

A.

SNMP traps from the switches and routers

B.

NetFlow v9

C.

SNMP polling of the switches and routers

D.

All of the above

E.

None of the above

How many Host Group Types can be tracked on the Dashboard within the Cascade Profiler GUI?

A.

Unlimited

B.

Ten

C.

Four

D.

Twenty

Which of the following are TRUE concerning packet capture jobs on the Cascade Shark appliancE. (Select 4)

A.

Packets can be captured from multiple capture ports on one Cascade Shark appliance.

B.

The maximum length the packet data can be specified.

C.

Packets can be filtered on host IP addresses.

D.

SSL traffic can be decoded if the appropriate certificate are loaded in the Cascade Shark appliance.

E.

The maximum storage bandwidth for the job can be specified in bits/sec.

F.

Multiple packet capture jobs can run concurrently.

If unable to connect to the Cascade Shark Appliance from the Cascade Pilot console it could be becausE. (Select 2)

A.

The correct communication port(s) are NOT open on the firewall between Cascade Pilot and Cascade Shark.

B.

The Cascade Shark is placed in "passthru" mode so Cascade Pilot access is not available

C.

The Cascade Shark appliance has no capture jobs configured.

D.

You may be running Cascade Pilot-Personal-Edition (PE). You need the full version of Cascade Pilot to connect to Cascade Shark.

E.

Trend/Index data is disabled on the Cascade Shark Appliance.

Live interfaces within Cascade Pilot as shown in the sources panel devices tab include:

A.

Local interfaces, Cascade Shark port interfaces, Cascade Shark aggregating port interfaces, and virtual interfaces associated with capture job traces.

B.

Local interfaces, Cascade Shark port interfaces, Cascade Shark aggregating port interfaces, and virtual interfaces associated with trace clips.

C.

Local interfaces ONLY. Cascade Shark port interfaces must be viewed from the remote menu.

D.

Interfaces associated with Cascade Shark ports ONLY. Local interfaces must be viewed from the local menu.

How many SNMP recipients can receive a single event notification for Cascade Profiler?

A.

1

B.

2

C.

3

D.

4

E.

5

Cascade Performance analytic event detail reports include multiple tables that are ordered by:

A.

The client or server that has changed the most (for the table metric) from the baseline (for example, impact).

B.

The top talker (client) that has sent the most data.

C.

The top talker (server) that has sent the most data.

D.

Server Delay so that you can determine if it was a server problem.

E.

Links that are 95% utilized.

How does Cascade Profiler obtain switch port discovery and population information?

A.

Switch Port Discovery Protocol (SPDP)

B.

Merging of CAM + ARP tables, both gathered via SNMP

C.

Merging of IF and ARP tables, both gathered via SNMP

D.

Merging of IF and CAM tables, both gathered via SNMP

To better analyze live traffic on Cascade Shark from Cascade Pilot you should:

A.

Apply a View on the live interface and then start a Capture Job on the capture port to analyze traffic later.

B.

Start a Capture Job on the capture port with a BPF filter and apply a View on the live interface for the same capture job.

C.

Start a Capture Job on the capture port, apply a View on the live interface and create a trace clip for the time window of interest.

D.

Never create a Capture Job to prevent packet drops.

The Cascade Profiler authenticates users before logging them in. What are the possible choices for authentication? (Select 3)

A.

Cascade Profiler local database

B.

User account specifies authentication by RADIUS

C.

TACACS

D.

RADIUS server to authenticate the user