RedHat RH302 Free Certification Exam Questions Answer Jul 2025 update

Question # 21

Create the partition having 100MB size and mount it on /mnt/neo

The Answer Is:

Answer:

Do the following steps as:

Use fdisk /dev/hdaTo create new partition.

Type nFor New partitions

It will ask for Logical or Primary Partitions. Press l for logical.

It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.

Type the Size: +100MYou can Specify either Last cylinder of Size here.

Press P to verify the partitions lists and remember the partitions name.

Press w to write on partitions table.

Either Reboot or use partprobe command.

Use mkfs –t ext3 /dev/hda? Where ? is your partition number

mke2fs –j /dev/hda? To create ext3 filesystem.

mkdir /mnt/neo

vi /etc/fstab

Write:

/dev/hda?/mnt/neoext3defaults1 2

Verify by mounting on current Sessions also:

mount /dev/hda? /mnt/neo

Question # 22

You are giving RHCE exam. You should boot the system in Run level 3. When you start the system after while it is going on runlevel 6 : like

INIT: Entering Run level 6

Sending TERM Single

Fix the problem and boot the system.

The Answer Is:

Answer:

It is due to either default runlevel or runlevel specific scripts.

id:?:initdefault:Where default runlevel is specified. It shouldn’t be 6.

l3:3:wait:/etc/rc.d/rc 6It reads the scripts of runlevel 6 while booting system on rulevel 3.

It should be like:

si::sysinit:/etc/rc.d/rc.sysinit

l0:0:wait:/etc/rc.d/rc 0

l1:1:wait:/etc/rc.d/rc 1

l2:2:wait:/etc/rc.d/rc 2

l3:3:wait:/etc/rc.d/rc 3 Should be like this

l4:4:wait:/etc/rc.d/rc 4

l5:5:wait:/etc/rc.d/rc 5

l6:6:wait:/etc/rc.d/rc 6

Question # 23

You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it’s giving error to load X window System. How will you fix that problem and make boot successfully run X Window System.

The Answer Is:

Answer:

Think while Problems occurred on booting System on Runlevel 5 (X Window).

/tmp is full or not

Quota is already reached

Video card or resolution or monitor is misconfigured.

xfs service is running or not.

Do These:

1.df –h /tmp/tmp is full remove the unnecessary file

quota usernameif quota is already reached remove unnecessary file from home directory.

Boot the System in runlevel 3.you can pass the Kernel Argument from boot loader.

Use command: system-config-displayIt will display a dialog to configure the monitor, Video card, resolution etc.

Set the Default Runlevel 5 in /etc/inittab

id:5:initdefault:

6.Reboot the System you will get the GUI login Screen.

Question # 24

Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.

The Answer Is:

Answer:

Do the following steps as:

1.Use fdisk /dev/hdaTo create new partition.

Type nFor New partition

It will ask for Logical or Primary Partitions. Press l for logical.

It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.

Type the Size: +100MYou can Specify either Last cylinder of Size here.

Press P to verify the partitions lists and remember the partitions name. Default System ID is 83 that means Linux Native.

Type t to change the System ID of partition.

Type Partition Number

Type 82 that means Linux Swap.

Press w to write on partitions table.

Either Reboot or use partprobe command.

mkswap /dev/hda?To create Swap File system on partition.

swapon /dev/hda?To enable the Swap space from partition.

free –mVerify Either Swap is enabled or not.

vi /etc/fstab

/dev/hda?swapswapdefaults0 0

Reboot the System and verify using free command that swap is automatically enabled or not.

Question # 25

There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don’t have Router. So, you are going to use your One Linux Server as a Router. How will you enable IP packets forward?

The Answer Is:

Answer:

Do the following steps as:

1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.

# echo “1” >/proc/sys/net/ipv4/ip_forward

2. /etc/sysctl.confwhen System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file /etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter.

net.ipv4.ip_forward=1

Here 0 means disable, 1 means enable.

Question # 26

The System you are using is for NFS (Network File Services). Some important data are shared from your system. Make automatically start the nfs and portmap services at boot time.

The Answer Is:

Answer:

We can control the services for current session and for next reboot time. For current Session, we use service servicename start or restart or stop or status. For automatically at next reboot time:

chkconfig servicename on or off

eg: chkconfig nfs on

chkconfig portmap on

ntsysv

Select the nfs and portmap services.

Reboot the system and identify whether services are running or not.

Question # 27

Create one partitions having size 100MB and mount it on /data.

The Answer Is:

Answer:

Do the following steps as:

Use fdisk /dev/hdaTo create new partition.

Type nFor New partitions

It will ask for Logical or Primary Partitions. Press l for logical.

It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.

Type the Size: +100MYou can Specify either Last cylinder of Size here.

Press P to verify the partitions lists and remember the partitions name.

Press w to write on partitions table.

Either Reboot or use partprobe command.

Use mkfs –t ext3 /dev/hda?

mke2fs –j /dev/hda? To create ext3 filesystem.

vi /etc/fstab

Write:

/dev/hda?/dataext3defaults0 0

11. Verify by mounting on current Sessions also:

mount /dev/hda? /data

Question # 28

Boot your System Successfully on runlevel 3.

The Answer Is:

Answer:

This is boot related problem. There will be same questions repeated two times but problem is different.

First When you restart the system you will get the Error:

File Not Found

mount: error 15 mounting ext3

mount: error 2 mounting none

switchroot: mount failed: 22

umount /initrd/dev/: 2

Kernel Panic: no syncing: Attempted to kill init !

This error occurred in your system before showing welcome redhat linux. That means problem in grub boot loader.

Restart the System

Check the grub boot loader configuration by pressing e shortcut key.

You will see like:

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root= / rhgb quiet

initrd /initrd-2.6.9-5.EL.img

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/root rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Then Edit Boot loader to make like

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/ rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Check all lines and edit as same as above. Press b to boot the system

After booting the system you should correct the /etc/grub.conf file.

If still you are getting Error likeFile not found, it seems that either kernel file or initrd file is missing. To troubleshoot with these problem, boot the system on rescue mode.

linux rescue

chroot /mnt/sysimage

Check the files on /boot, if not available install the kernel package from ftp or nfs server

Create the initrd image file on boot using: mkinitrd initrd-2.6.9-5.EL.img `uname –r`

Question # 29

There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24 Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server. How will make successfully ping to 192.168.1.0/24 Network’s Host?

The Answer Is:

Answer:

Do the following steps as:

1.vi /etc/sysconfig/network

GATEWAY=192.168.0.254

vi /etc/sysconf/network-scripts/ifcfg-eth0

DEVICE=eth0

BOOTPROTO=static

ONBOOT=yes

IPADDR=192.168.0.?

NETMASK=255.255.255.0

GATEWAY=192.168.0.254

2.service network restart

Want to know why?

Explanation:

Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on 192.168.1.0/24 should go through 192.168.0.254.

Question # 30

Your system is giving error to load X window System. Make successfully boot your system in runlevel5.

The Answer Is:

Answer:

While you load the X Window System, you will get the problem. Problem may caused by different error.

1.Check the /tmp is full ?

2.Check your quota, hard limit is already crossed ?

3.Check xfs service is running ?

4.Configure the Video card, Resolution, monitor type using: system-config-display (Most Probably in Redhat exam)

5.Edit the /etc/inittab to set default runlevel 5.

id:5:initdefault:

Weekend Sale - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: sntaclus

Free Practice Questions for RedHat RH302 Exam

The Answer Is:

The Answer Is:

The Answer Is:

The Answer Is:

The Answer Is:

The Answer Is:

The Answer Is:

The Answer Is:

The Answer Is:

Explanation:

The Answer Is: