Free Practice Questions for Microsoft DP-300 Exam

Automating Azure SQL DB index and statistics maintenance using Azure Automation:

1. Create Azure automation account (Step 1)

2. Import SQLServer module (Step 2)

3. Add Credentials to access SQL DB

This will use secure way to hold login name and password that will be used to access Azure SQL DB

4. Add a runbook to run the maintenance (Step 3)

Steps:

1. Click on " runbooks " at the left panel and then click " add a runbook "

2. Choose " create a new runbook " and then give it a name and choose " Powershell " as the type of the runbook and then click on " create "

5. Schedule task (Step 4)

Steps:

1. Click on Schedules

2. Click on " Add a schedule " and follow the instructions to choose existing schedule or create a new schedule.

Scenario: Authenticate database users by using Active Directory credentials.

The configuration steps include the following procedures to configure and use Azure Active Directory authentication.

Create and populate Azure AD.

Optional: Associate or change the active directory that is currently associated with your Azure Subscription.

Create an Azure Active Directory administrator. (Step 1)

Configure your client computers.

Create contained database users in your database mapped to Azure AD identities. (Step 2)

Connect to your database by using Azure AD identities. (Step 3)

Scenario: SalesSQLDb1 uses database firewall rules and contained database users.

Basic Concept: This question tests high availability and disaster recovery design for Azure SQL, SQL Server on Azure VMs, and regional failure scenarios.

Why B is Correct: Update the connection strings of SalesSQLDb1App1. is part of the availability or recovery design space, but the correct choice must satisfy the specified failover, restore, quorum, RPO, or RTO requirement. In this scenario, the important constraint is: What should you do after a failover of SalesSQLDb1 to ensure that the database remains accessible to SalesSQLDb1App1? Update the connection strings of SalesSQLDb1App1. satisfies that constraint without adding an unrelated service or manual process.

Why A is Wrong: Configure SalesSQLDb1 as writable. is part of the availability or recovery design space, but the correct choice must satisfy the specified failover, restore, quorum, RPO, or RTO requirement. It is not wrong technology in general, but it is the wrong HA/DR control for this scenario ' s failure model.

Why C is Wrong: Update the firewall rules of SalesSQLDb1. is part of the availability or recovery design space, but the correct choice must satisfy the specified failover, restore, quorum, RPO, or RTO requirement. It handles a different resilience pattern and would not deliver the failover or recovery behavior required here.

Why D is Wrong: Update the users in SalesSQLDb1. is part of the availability or recovery design space, but the correct choice must satisfy the specified failover, restore, quorum, RPO, or RTO requirement. It is not wrong technology in general, but it is the wrong HA/DR control for this scenario ' s failure model.

To enable change data capture (CDC) for db1, you need to run the stored procedure sys.sp_cdc_enable_db in the database context. CDC is a feature that records activity on a database when tables and rows have been modified1. CDC can be used for various scenarios, such as data synchronization, auditing, or ETL processes2.

Here are the steps to enable CDC for db1:

Connect to db1 using SQL Server Management Studio, Azure Data Studio, or any other tool that supports Transact-SQL statements.

Open a new query window and run the following command: EXEC sys.sp_cdc_enable_db; GO

This command will enable CDC for the database and create the cdc schema, cdc user, metadata tables, and other system objects for the database3.

To verify that CDC is enabled for db1, you can query the is_cdc_enabled column in the sys.databases catalog view. The value should be 1 for db1.

These are the steps to enable CDC for db1

Connect to db1 in SQL Server Management Studio and run:

ALTER DATABASE [db1]

SET QUERY_STORE (MAX_STORAGE_SIZE_MB = 4000);

Microsoft documents that Query Store maximum storage size is changed with:

ALTER DATABASE < database_name >

SET QUERY_STORE (MAX_STORAGE_SIZE_MB = < size > );

For Azure SQL Database, the maximum allowed MAX_STORAGE_SIZE_MB value is 10,240 MB, so 4,000 MB is valid.

Method 1 — SSMS / T-SQL Method

This is the cleanest method for the simulation.

Step 1: Open SQL Server Management Studio

Open SQL Server Management Studio.

Connect to the Azure SQL logical server that hosts db1.

Use SQL authentication or Microsoft Entra authentication.

In Connection Properties, select:

db1

You can also connect to master, but for this task it is cleaner to open a query window in db1.

Step 2: Run the Query Store configuration command

Open a new query window and run:

ALTER DATABASE [db1]

SET QUERY_STORE (MAX_STORAGE_SIZE_MB = 4000);

This changes the Query Store maximum allocated storage size to 4,000 MB.

Step 3: Verify the setting

Run this query in db1:

SELECT

actual_state_desc,

desired_state_desc,

current_storage_size_mb,

max_storage_size_mb

FROM sys.database_query_store_options;

Expected result:

max_storage_size_mb = 4000

Microsoft documents sys.database_query_store_options as the catalog view that returns Query Store configuration, including max_storage_size_mb.

Method 2 — SSMS Graphical Method

Use this if the simulation expects a GUI action.

Step 1: Connect to the server

Open SQL Server Management Studio.

Connect to the Azure SQL logical server.

Expand Databases.

Right-click db1.

Select Properties.

Step 2: Open Query Store settings

In the Database Properties window, select Query Store.

Find the setting:

Max Size (MB)

or:

Maximum Storage Size (MB)

Change the value to:

4000

Select OK.

Step 3: Verify

Run:

SELECT max_storage_size_mb

FROM sys.database_query_store_options;

Expected value:

4000

Azure Portal Clarification

The Azure portal is not the best tool for this specific Query Store configuration. Query Store size is a database engine setting, not a normal Azure resource setting like backup retention, locks, alerts, or private endpoints.

Use SSMS/T-SQL for this task.

Important Notes

Query Store must remain enabled

Do not disable Query Store. Azure SQL Database uses Query Store heavily, and Microsoft notes that Query Store is enabled by default for Azure SQL Database. The task only asks to increase the maximum storage size, not to change capture mode, cleanup policy, or operation mode.

4,000 MB is valid

Azure SQL Database allows Query Store MAX_STORAGE_SIZE_MB up to 10,240 MB, so this setting is within the allowed range.

Final Exam-Lab Action

Run this against db1:

ALTER DATABASE [db1]

SET QUERY_STORE (MAX_STORAGE_SIZE_MB = 4000);

Then verify with:

SELECT max_storage_size_mb

FROM sys.database_query_store_options;

The task is complete when the result shows:

4000

Requirement: Configure active geo-replication for Azure SQL Database db1. The geo-replica must be created in East US or East US 2 on the logical Azure SQL server:

sql60152867-dr.database.windows.net

The important point: in Azure SQL, the logical server name used in portal/T-SQL is usually:

sql60152867-dr

not the full FQDN.

Microsoft states that active geo-replication is configured per database, and a geo-secondary is created for an existing Azure SQL Database. After creation and seeding, changes from the primary are replicated asynchronously to the secondary.

Method 1 — Azure Portal Method

This is the safest method for the simulation if the portal is available.

Step 1: Open the primary database

Sign in to the Azure portal.

Search for SQL databases.

Select the database named db1.

Confirm you are looking at the primary database, not an existing secondary.

Step 2: Open the Replicas blade

In the left menu of the db1 database page, scroll to Data management.

Select Replicas.

Select Create replica.

Microsoft’s portal workflow is: open the database, go to Data management > Replicas, and choose Create replica.

Step 3: Configure the geo-secondary replica

On the Create SQL Database replica page, configure the target like this:

Setting

Value

Database

db1

Replica type

Geo replica / Active geo-replication

Target server

sql60152867-dr

Region

East US or East US 2

Database name

db1

Compute + storage

Keep same or compatible with primary

Elastic pool

Only choose this if the lab specifically requires an elastic pool

Do not create a failover group unless the task asks for one. This task says active geo replication, so configure a database-level geo-replica, not a failover group. Microsoft explicitly separates active geo-replication from failover groups and notes that active geo-replication is configured per database.

Step 4: Review and create

Select Review + create.

Confirm the target server is:

sql60152867-dr

Confirm the region is either:

East US

or

East US 2

Select Create.

Azure will create the secondary database and begin the seeding process. Microsoft notes that the secondary database has the same name as the primary by default and begins replication after it is created and seeded.

Step 5: Verify replication

After deployment completes:

Go back to the primary database db1.

Open Replicas again.

Under Geo replicas, confirm that a replica exists on:

sql60152867-dr.database.windows.net

Confirm the replica status is healthy, online, or synchronizing.

You can also open the target SQL server sql60152867-dr and verify that a database named db1 now exists there.

Method 2 — SSMS / T-SQL Method

Use this method if the portal is awkward or the exam simulation expects T-SQL.

Step 1: Allow SSMS connectivity

Before connecting with SSMS:

In Azure portal, open the primary SQL server hosting db1.

Go to Networking or Firewalls and virtual networks.

Add your client IP address.

Repeat this on the secondary server:

sql60152867-dr.database.windows.net

This matters because SSMS must be able to connect to the Azure SQL logical server.

Step 2: Connect to the primary server in SSMS

Open SQL Server Management Studio.

Connect to the primary Azure SQL logical server that hosts db1.

Use SQL admin credentials or Microsoft Entra admin credentials.

In Connection Properties, connect to the database:

master

This is important. For Azure SQL Database geo-replication setup through T-SQL, run the command from the master database on the primary server.

Step 3: Run the active geo-replication command

Run this query:

ALTER DATABASE [db1]

ADD SECONDARY ON SERVER [sql60152867-dr]

WITH (ALLOW_CONNECTIONS = ALL);

Microsoft documents that ALTER DATABASE ... ADD SECONDARY ON SERVER creates a secondary database for an existing Azure SQL Database and starts data replication. The official example also uses WITH (ALLOW_CONNECTIONS = ALL) to create a readable geo-secondary.

Step 4: Verify the replication link

Still connected to the primary server, run:

SELECT *

FROM sys.geo_replication_links;

Or use:

SELECT *

FROM sys.dm_geo_replication_link_status;

Microsoft lists sys.geo_replication_links and sys.dm_geo_replication_link_status as views used to return information about existing replication links and replication status.

Optional PowerShell Method

Only use this if the lab gives you Cloud Shell or PowerShell access.

New-AzSqlDatabaseSecondary `

-ResourceGroupName " < PrimaryResourceGroupName > " `

-ServerName " < PrimaryServerName > " `

-DatabaseName " db1 " `

-PartnerResourceGroupName " < SecondaryResourceGroupName > " `

-PartnerServerName " sql60152867-dr " `

-PartnerDatabaseName " db1 "

Microsoft identifies New-AzSqlDatabaseSecondary as the PowerShell cmdlet that creates a secondary database for an existing Azure SQL Database and starts replication.

Final Answer / What You Must Achieve

The task is complete when:

Database db1 still exists on the primary server.

A secondary database named db1 exists on:

sql60152867-dr.database.windows.net

The target server is in East US or East US 2.

The replica appears under db1 > Replicas > Geo replicas.

Replication status is healthy, online, seeding, or synchronizing.

You did not configure a failover group unless separately requested.

Basic Concept: This question tests choosing the correct Azure migration approach by matching the source platform, target service, downtime tolerance, and administrative effort.

Why the selected answer is Correct: The selected values fit this scenario because they apply the required Azure SQL configuration at the correct scope and sequence: You need to migrate DB1 to a vCore-based purchasing model by using the Azure Command-Line Interface (Azure CLI).

Why the alternate choices are Wrong: The alternate selections would either use a migration tier that does not match the downtime requirement, choose a network resource that does not support the migration path, or add an unnecessary deployment component.

Basic Concept: This question tests plan and implement data platform resources in the DP-300 exam context. The correct choice is determined by the exact service boundary and operational requirement stated in the scenario.

Why B is Correct: From SQLVM1, uninstall the SQL Server instance. is an Azure data-platform feature, but it must match the workload model, service tier, migration path, or deployment constraint described in the scenario. The scenario asks for: You need to change the Microsoft SQL Server instance on SQLVM1 to the Standard edition. That makes From SQLVM1, uninstall the SQL Server instance. the option that satisfies the required Azure SQL layer and operational outcome.

Why A is Wrong: From the SQL Server Installation Center on SQLVM1. run the Edition Upgrade wizard. is an Azure data-platform feature, but it must match the workload model, service tier, migration path, or deployment constraint described in the scenario. It applies to a different Azure data-platform design than the one the question is testing.

Why C is Wrong: From the SQL Server Installation Center on SQLVM1. run the Repair wizard. is an Azure data-platform feature, but it must match the workload model, service tier, migration path, or deployment constraint described in the scenario. It mismatches the target platform, migration method, compute tier, or deployment model described in the scenario, so it would not satisfy the workload as stated.

Why D is Wrong: From the Azure portal, reconfigure SQLVM1. is an Azure data-platform feature, but it must match the workload model, service tier, migration path, or deployment constraint described in the scenario. It applies to a different Azure data-platform design than the one the question is testing.

To ensure that any enhancements made to the Query Optimizer through patches are available to dbl and db2 on sql37006895, you need to enable the query optimizer hotfixes option for each database. This option allows you to use the latest query optimization improvements that are not enabled by default1. You can enable this option by using the ALTER DATABASE SCOPED CONFIGURATION statement2.

Here are the steps to enable the query optimizer hotfixes option for dbl and db2 on sql37006895:

Connect to sql37006895 using SQL Server Management Studio, Azure Data Studio, or any other tool that supports Transact-SQL statements.

Open a new query window and run the following commands for each database:

-- Switch to the database context

USE dbl;

GO

-- Enable the query optimizer hotfixes option

ALTER DATABASE SCOPED CONFIGURATION SET QUERY_OPTIMIZER_HOTFIXES = ON;

GO

Repeat the same commands for db2, replacing dbl with db2 in the USE statement.

To verify that the query optimizer hotfixes option is enabled for each database, you can query the sys.database_scoped_configurations catalog view. The value of the query_optimizer_hotfixes column should be 1 for both databases.

These are the steps to enable the query optimizer hotfixes option for dbl and db2 on sql37006895.

To configure a disaster recovery solution for db1, you can use the failover groups feature of Azure SQL Database. Failover groups allow you to manage the replication and failover of a group of databases across different regions with the same connection strings1. You can also use active geo-replication as an alternative, but you will need to update the connection strings manually after a failover2.

Here are the steps to create a failover group for db1 with the secondary server in the West US 3 region:

Using the Azure portal:

Go to the Azure portal and select your Azure SQL Database server that hosts db1.

Select Failover groups in the left menu and click on Add group.

Enter a name for the failover group and select West US 3 as the secondary region.

Click on Create a new server and enter the details for the secondary server, such as server name, admin login, password, and subscription.

Click on Select existing database(s) and choose db1 from the list of databases on the primary server.

Click on Configure failover policy and select the failover mode, grace period, and read-write failover endpoint mode according to your preferences.

Click on Create to create the failover group and start the replication of db1 to the secondary server.

Using PowerShell commands:

Install the Azure PowerShell module and log in with your Azure account.

Run the following command to create a new server in the West US 3 region: New-AzSqlServer -ResourceGroupName < your-resource-group-name > -ServerName < your-secondary-server-name > -Location " West US 3 " -SqlAdministratorCredentials $(New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList " < your-admin-login > " , $(ConvertTo-SecureString -String " < your-password > " -AsPlainText -Force))

Run the following command to create a new failover group with db1: New-AzSqlDatabaseFailoverGroup -ResourceGroupName < your-resource-group-name > -ServerName < your-primary-server-name > -PartnerResourceGroupName < your-resource-group-name > -PartnerServerName < your-secondary-server-name > -FailoverGroupName < your-failover-group-name > -Database db1 -FailoverPolicy Manual -GracePeriodWithDataLossHours 1 -ReadWriteFailoverEndpoint " Enabled "

You can modify the parameters of the command according to your preferences, such as the failover policy, grace period, and read-write failover endpoint mode.

These are the steps to create a failover group for db1 with the secondary server in the West US 3 region.