Free Practice Questions for Huawei H12-811_V1.0 Exam

Comprehensive Explanation: The quit command is used to return from the system view to the user view in Huawei ' s VRP (Versatile Routing Platform). This command allows users to exit the current configuration mode and revert to the default user view. For example, when you are in the system view and you want to return to the user view, typing quit takes you back to the initial prompt without saving the current configuration​​.

Detailed Explanation:RSTP (Rapid Spanning Tree Protocol) combines the Blocking, Listening, and Disabled states into Discarding, reducing the number of states to Discarding, Learning, and Forwarding. RSTP does not use a separate Listening state, as in standard STP. (Reference: HCIA-Datacom Training Material, RSTP Port States)

Detailed Explanation:DNS (Domain Name System) is responsible for translating human-readable domain names (like www.example.com) into IP addresses, enabling devices to locate services on a network. (Reference: HCIA-Datacom Training Material, DNS Function and Protocol Overview)

Huawei ACLs operate at different layers:

Basic ACL (Correct): Matches Layer 3 IP source addresses.

Advanced ACL (Correct): Matches Layer 3 (IP, TCP, UDP) and Layer 4 information.

User ACL (Correct): Used in QoS policies to filter based on IP addresses.

Layer 2 ACL (Incorrect): Works at Layer 2 (Ethernet frames) and cannot match Layer 3 (network layer) information such as IP addresses.

Thus, the correct answer is D.

Comprehensive Explanation: Host A and Host B cannot communicate because they are in different subnets. Host A ' s IP address is 10.0.12.1/30, while Host B ' s IP address is 10.0.12.5/24. Since they are in different subnet ranges and there is no router in the diagram to perform inter-subnet routing, direct communication between them is not possible without a router to route traffic between the different subnets.

Analysis of Possible Causes:

Option A: " The administrator account has been disabled " is a possible cause as a disabled account cannot access the system even if Telnet is enabled.

Option B: Incorrect because the Telnet service being disabled would affect all users, not just one administrator.

Option C: " The administrator account has been deleted " is a valid reason as a deleted account cannot log in.

Option D: " The user level of the administrator account has been changed to 0 " is correct. User level 0 typically has insufficient privileges for Telnet access​​.

Detailed Explanation:In a tree topology, nodes are arranged hierarchically with root nodes at the top and leaf nodes at the base. This structure is often used in larger networks because it supports scalability and easy addition of nodes. However, if a higher-level node (e.g., root or intermediate node) fails, all dependent nodes in its subtree lose connectivity. Therefore, faults at higher layers have a more significant impact than faults at the leaves. (Reference: HCIA-Datacom Training Material, Network Topology Types)