Summer Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: exc65

A customer has an HCP system consisting of four G10 nodes and they want to expand the configuration with another four G11 nodes.

To implement this upgrade, what is the minimum HCP software version required?

A.

Version 8.3

B.

Version 8.5

C.

Version 9.0

D.

Version 10.1

What is the minimum RAM capacity installed in a HCP G10 server?

A.

16 GB

B.

32 GB

C.

64 GB

D.

123 GB

You are installing an HCP G10 and are now setting the front-end connectivity. The customer has provided you with IP addresses for their network for each node.

Which two actions should be performed on each node as part of the OS installation? (Choose two.)

A.

Set the BMC IP address

B.

Set the NTP IP address(es)

C.

Set the front-end IP address

D.

Set the gateway IP address

In the event of a SAN-attached G10 node failure, which LUN configuration will maintain access to a given set of data LUNs?

A.

Data Protection Level 2

B.

HCP LUN replicator

C.

Zero Copy Failover

D.

Dynamic multi-pathing

You are installing an HCP G10 and are setting up the BIOS.

What are two requirements when configuring in the BIOS? (Choose two.)

A.

The BMC IP address, net mask and gatewayshould be set

B.

Fast boot should be enabled

C.

PXE should be disabled for all interfaces

D.

The OS virtual disk should be selected as boot device

How is the software update package uploaded to an HCP S10?

A.

using BMC

B.

usingan SFTP connection

C.

usingan SSH connection

D.

using the Management Console

After adding new nodes to an HCP G10 system, which two actions should be performed? (Choose two.)

A.

Upgrade the new nodes software

B.

Run the capacity balancing service

C.

Adjust the region count

D.

Reboot all the new nodes

You are installing an HCP G10 with attached storage. A VSP G1000 is used to provision the storage and is used by several applications.

Which action should be performed?

A.

Shutdown the applications that use the VSP G1000

B.

Enable shared storage optimization in the System Management Console

C.

Enable the shared storage option on the G10 HBA

D.

Specify that shared storage is used when prompted by the installation program

What is required to configure host group security on a new HCP G10 with attached storage?

A.

MAC address of the back-end NICs

B.

MAC address of the front-end NICs

C.

World Wide Port Name

D.

World Wide Node Name

What is the maximum number of drives supported in one HCP S10 enclosure?

A.

24

B.

30

C.

60

D.

128