Free Practice Questions for CompTIA SK0-005 Exam

Few people are expected to use the database at the same time and users don’t need to customize the design of the database.

The write cache is a feature of some RAID controllers that allows them to temporarily store data in a fast memory buffer before writing it to the disk drives. This improves the performance and efficiency of write operations, especially for random and small writes. However, if the battery on the controller goes bad, the controller may disable the write cache to prevent data loss in case of a power failure. This can degrade the disk drive performance significantly, as every write operation will have to wait for the disk drives to complete. References: https://www.dell.com/support/kbdoc/en-us/000131486/understanding-raid-controller-battery-learn-cyclehttps://www.techrepublic.com/article/understanding-raid-controller-write-cache/

Log rotation is a process that periodically renames, compresses, and deletes old log files to free up disk space and keep log files manageable. Log rotation can be configured using tools such as logrotate or cron on Linux systems, or using Windows Task Scheduler or PowerShell scripts on Windows systems. Log rotation can also help with log analysis and troubleshooting by making it easier to find relevant information in smaller and more recent log files. References: https://www.mezmo.com/learn-log-management/what-is-log-rotation-how-does-it-workhttps://docs.microsoft.com/en-us/windows-server/administration/windows-commands/logman

RTO (Recovery Time Objective) is a measure of how much downtime an organization can tolerate during an unplanned outage. It is the maximum time allowed for restoring normal operations after a disaster. RTO is one of the key metrics for disaster recovery planning and testing. SLA (Service Level Agreement) is a contract that defines the expected level of service and performance between a provider and a customer. BIA (Business Impact Analysis) is a process that identifies and evaluates the potential effects of a disaster on critical business functions and processes. MTTR (Mean Time To Repair) is a measure of how long it takes to fix a failed component or system. References: https://parachute.cloud/rto-vs-rpo/ https://www.techopedia.com/definition/13622/service-level-agreement-sla https://www.techopedia.com/definition/1032/business-impact-analysis-biahttps://www.techopedia.com/definition/8239/mean-time-to-repair-mttr

The IP address/default gateway combination that the administrator should have used for the new server is IP address: 192.168.10.2/24 and Default gateway: 192.168.10.1. The IP address and the default gateway of a device must be in the same subnet to communicate with each other. A subnet is a logical division of a network that allows devices to share a common prefix of their IP addresses. Thesubnet mask determines how many bits of the IP address are used for the network prefix and how many bits are used for the host identifier. A /24 subnet mask means that the first 24 bits of the IP address are used for the network prefix and the last 8 bits are used for the host identifier. Therefore, any IP address that has the same first 24 bits as the default gateway belongs to the same subnet. In this case, the default gateway has an IP address of 192.168.10.1/24, which means that any IP address that starts with 192.168.10.x/24 belongs to the same subnet. The new server has an IP address of 192.168.1.1/24, which does not match the first 24 bits of the default gateway, so it belongs to a different subnet and cannot communicate with the default gateway. To fix this issue, the administrator should change the IP address of the new server to an unused IP address that starts with 192.168.10.x/24, such as 192.168.10.2/24.

The administrator should use the command chmod 754 /home/Ann to resolve the issue without granting unnecessary permissions. The chmod command is used to change the permissions of files and directories on a Linux server. The permissions are represented by three numbers, each ranging from 0 to 7, that correspond to the read ®, write (w), and execute (x) permissions for the owner, group, and others respectively. The numbers are calculated by adding up the values of each permission: r = 4, w = 2, x = 1. For example, 7 means rwx (4 + 2 + 1), 6 means rw- (4 + 2), 5 means r-x (4 + 1), etc. In this case, Ann’s home directory has the permissions dr-xr-xr–, which means that only the owner (d) can read ® and execute (x) the directory, and the group and others can only read ® and execute (x) but not write (w) to it. This prevents Ann from saving files to her home directory. To fix this issue, the administrator should grant write permission to the owner by using chmod 754 /home/Ann, which means that the owner can read ®, write (w), and execute (x) the directory, the group can read ® and execute (x) but not write (w) to it, and others can only read ® but not write (w) or execute (x) it. This way, Ann can save files to her home directory without giving unnecessary permissions to others.

This is the best action to perform before applying patches to one of the hosts in a high availability cluster. A high availability cluster is a group of hosts thatact like a single system and provide continuous uptime. A high availability cluster is often used for load balancing, backup, and failover purposes. Failover is a process of transferring workloads from one host to another in case of a failure or maintenance. By failing over all VMs (Virtual Machines) from the host that needs to be patched to another host in the cluster, the technician can ensure that there is no downtime or data loss during the patching process. Disabling the heartbeat network is not a good action to perform, as this would disrupt the communication and synchronization between the hosts in the cluster. Fallback cluster services is not a valid term, but it may refer to restoring cluster services after a failover, which is not relevant before applying patches. Setting the cluster to active-active is not a good action to perform, as this would increase the load on both hosts and reduce redundancy. References: https://www.howtogeek.com/190014/virtualization-basics-understanding-techniques-and-fundamentals/https://www.howtogeek.com/428483/what-is-end-to-end-encryption-and-why-does-it-matter/

Constant replication is a type of replication in which all files are replicated, all the time. Replication is a process of copying data from one location to another for backup, recovery, or distribution purposes. Constant replication is also known as real-time replication or synchronous replication. It ensures that any changes made to the source data are immediately reflected on the target data without any delay or lag. Constant replication provides high availability and consistency, but it requires high bandwidth and low latency. Application consistent replication is a type of replication that ensures that the replicated data is consistent with the state of the application that uses it. It involves quiescing or pausing the application before taking a snapshot of the data and resuming the application after the snapshot is taken. Application consistent replication provides better recovery point objectives than crash consistent replication, which does not quiesce the application before taking a snapshot. Synthetic full replication is a type of replication that involves creating a new full backup by using the previous full backup and related incremental backups. It reduces the backup window and network bandwidthconsumption by transferring only changed data from the source to the target. Full replication is a type of replication that involves copying all data from the source to the target regardless of whether it has changed or not. It provides a complete backup of the data, but it requires more storage space and network bandwidth than incremental or differential replication. References: https://www.howtogeek.com/199068/how-to-upgrade-your-existing-hard-drive-in-under-an-hour/ https://www.howtogeek.com/202794/what-is-the-difference-between-127.0.0.1-and-0.0.0.0/https://www.howtogeek.com/443611/how-to-encrypt-your-macs-system-drive-removable-devices-and-individual-files/

The administrator should only allow secure traffic and DNS inquiries on the server, which means that only ports 22, 53, and 443 should be open. Port 22 is used for SSH (Secure Shell), which is a protocol that allows secure remote login and command execution over a network connection using a command-line interface (CLI). Port 53 is used for DNS (Domain Name System), which is a service that translates domain names into IP addresses and vice versa. Port 443 is used for HTTPS (Hypertext Transfer Protocol Secure), which is a secure version of HTTP that encrypts the data exchanged between a web browser and a web server.

These are two measures that should be taken when a data breach occurs. A data breach is an unauthorized or illegal access to confidential or sensitive data by an internal or external actor. A data breach can result in financial losses, reputational damage, legal liabilities, and regulatory penalties for the affected organization. Disclosing the incident is a measure that involves informing the relevant stakeholders, such as customers, employees, partners, regulators, and law enforcement, about the nature, scope, and impact of the data breach. Disclosing the incident can help to mitigate the negative consequences of the data breach, comply with legal obligations, and restore trust and confidence. Identifying the exploited vulnerability is a measure that involves investigating and analyzing the root cause and source of the data breach. Identifying the exploited vulnerability can help to prevent further data loss, remediate the security gaps, and improve the security posture of the organization. Restoring the data from backup is a measure thatinvolves recovering the lost or corrupted data from a secondary storage device or location. However, this does not address the underlying issue of how the data breach occurred or prevent future breaches. Disabling unnecessary ports is a measure that involves closing or blocking network communication endpoints that are not required for legitimate purposes. However, this does not address how the data breach occurred or what vulnerability was exploited. Running an antivirus scan is a measure that involves detecting and removing malicious software from a system or network. However, this does not address how the data breach occurred or what vulnerability was exploited. Moving the data to a different location is a measure that involves transferring the data to another storage device or location that may be more secure or less accessible. However, this does not address how the data breach occurred or what vulnerability was exploited. References: https://www.howtogeek.com/428483/what-is-end-to-end-encryption-and-why-does-it-matter/ https://www.howtogeek.com/202794/what-is-the-difference-between-127.0.0.1-and-0.0.0.0/https://www.howtogeek.com/443611/how-to-encrypt-your-macs-system-drive-removable-devices-and-individual-files/