A museum wants to offer Wi-Fi to its visitors. One of their requirements is to have the APs blend into the design of the museum. What should you do to meet this requirement?
What is the DSCP Per Hop Behavior equivalent classification of the 802.11 AC_VO priority level?
While using a USB adapter attached to a USB hub and your laptop for protocol analysts you notice that the SNR is lower than expected. The USB adapter is an 802 11 ac 3x3 3 adapter and is connected to a USB 3 hub. What is likely causing the SNR variation?
How are EAP messages transported over 802.11 wireless LANS?
Response:
To ensure that your design meets the requirements of the WLAN, what should be defined in your WLAN design software that will result in different requirements at varying locations on the floor plan1?
What is the minimum PoE budget needed on a switch to support 6 (six) APs that can only be powered using IEEE 802.3at if no other details are provided?
Response:
You deployed an AP and installed its antenna, and you now need to set the AP transmit power. Given a desired EIRP of 21 dBm, and an antenna
gain of 5.85 dBd connected through 25 feet of cable with a loss specification of 4 dB/100 feet.
Assuming that there is no significant loss from the connectors, what should be the transmit power level for this AP?
Your customer requires fast secure roaming. Which two types of roaming are specified in 802.11-2016 FT roaming that will help meet this goal?
Which type of building material causes the most attenuation of Wi-Fi signals'?
iPerf is a tool used in site surveys and validation surveys for what purpose?
Response:
