Free Practice Questions for CIPS L4M7 Exam

Explanation

Lean thinking aims to remove wastes from work processes. Before diving into the 8 wastes, it is important to understand what waste is. Waste is any action or step in a process that does not add value to the customer. In other words, waste is any process that the customer does not want to pay for.

The original seven wastes (Muda) was developed by Taiichi Ohno, the Chief Engineer at Toyota, as part of the Toyota Production System (TPS). The seven wastes are Transportation, Inventory, Motion, Waiting, Overproduction, Overprocessing and Defects. They are often referred to by the acronym ‘TIMWOOD’. The 8th waste of non-utilized talent or ‘Skills’ of workers was later introduced in the 1990s when the Toyota Production System was adopted in the Western world. As a result, the 8 wastes are commonly referred to as ‘TIMWOODS’.

Source: The lean way

Multiple approval levels for a small purchase request is an example of over-processing since this adds more unnecessary work to users and procurement professionals.

Explanation

Delphi method is a structured forecasting technique using a panel of experts and a number of rounds of questioning. Responses are shared after each round and the experts encouraged to recon-sider their own responses. It is intended to achieve a consensus view.

Acquisition costs include all expenses incurred to bring an asset to its operational state, such as installation and commissioning. These costs are essential to the total cost of ownership (TCO) in whole-life asset management, helping organizations understand the full initial investment required to make the asset usable.

Explanation

Tail Spend is derived from ABC Analysis, Class A high value suppliers, Tail Spend is formed from class B & C suppliers, equates to 20% of the total spend, B is Mid Tail and C is Long tail. Effective Spend Analysis and tail spend management, ensures that procurement can focus on creating an optimum and efficient sourcing strategy.

Procurement Spend Analysis

Procurement organisations effectively identify and manage suppliers using a sourcing strategy. Tail suppliers normally have low strategic value and makes the category management, very difficult . Spend Analysis and Category Management are very closely aligned, Spend Analysis including ABC, provides the category manager, with spend visibility.

Spend Analysis and procurement metrics are used to create category plans, build supplier relation-ships, to maintain service levels and deliver the best possible price and quality for goods and ser-vices bought. The acquisition of Spend data and subsequent Spend Analysis, provides Category Managers access to a well-structured procurement process,

Explanation

Net present value (NPV) is the 'today' net value that deprives from 'future' cash flow of an invest-ment or a capital purchase. Net Present Value is a helpful tool for assessing the total lifetime value of an investment. Procurement professionals or investors can base on this value to make decision to achieve value for money. Generally, an organisation should select the offer which has the highest NPV among their options. Preferably, the NPV of an capital investment should be positive, which means the investment eventually adds value to the business.

Explanation

One-dimensional (or 1D) barcodes systematically represent data by varying the widths and spac-ings of parallel lines. These include some of the most traditional and well-recognized barcode types, such as the UPC and EAN codes. 1D barcodes are also commonly referred to as linear barcodes.

Two-dimensional (2D) barcodes look like squares or rectangles that contain many small, individual dots. QR codes, Data matrix and Aztec codes are examples of 2D barcodes

Numerical code contains all numbers, no letters

There are two different scan engine types (laser scanner versus imager) for interpreting the infor-mation provided in the barcode. Many companies producing the technology capable of reading the barcode data uses the term “scanning” regardless of the type of scan engine used. For the purposes of these FAQs, we are trying to draw a clearer distinction for you.

Linear (1D) codes can be scanned with a traditional laser scanner. A laser scan engine uses a laser and mirror to create the bar that scans the information. 1D barcode scanners will only interpret the linear barcode scanning technology. 1D barcode scanners are typically less expensive since the type of encryptions they can decode is limited.

Diagram Description automatically generated

LO 1, AC 1.2

Explanation

Where stock turn (inventory turnover) is low and there are potential risks of redundancy or obsolescence, the buying organisation may adopt vendor owned stock. In this system, a supplier (vendor) maintains a stock of items ready to be used at the point of customer consumption. The supplier owns the stock until it is used by the purchaser; only then is the purchaser invoiced for it.

Just in case and larger safety stock would significantly increase the stock level, which may cause redundancy or obsolescence.

Forrester effect (or Bullwhip effect) is a distribution channel phenomenon in which forecasts yield supply chain inefficiencies. It refers to increasing swings in inventory in response to shifts in customer demand as one moves further up the supply chain.

Explanation

Possible solutions to the high irregular or seasonal demand problems are listed below:

• Take advantage of the height of the warehouse

- Mezzanine floor

- High racking system (increase storage capacity but require high-reach material handling equip-ment)

• Eliminate dead stock or inventory

• Improve material flow

• Improve storage location method

• Consider using aisle space during demand peak

• Narrow aisles between racks (require narrow handling equipment)

• Carousel-type storage system

• Auto-storage and retrievals system (ASRS)

Explanation

Enterprise resource planning (ERP) is the integrated management of main business processes, often in real time and mediated by software and technology. ERP provides an integrated and con-tinuously updated view of core business processes using common databases maintained by a data-base management system. ERP systems track business resources—cash, raw materials, production capacity—and the status of business commitments: orders, purchase orders, and payroll. The applications that make up the system share data across various departments (manufacturing, purchasing, sales, accounting, etc.) that provide the data. ERP facilitates information flow between all business functions and manages connections to outside stakeholders.

Manufacturing resource planning (MRP II) is defined as a method for the effective planning of all resources of a manufacturing company. Ideally, it addresses operational planning in units, financial planning, and has a simulation capability to answer "what-if" questions and extension of closed-loop MRP. This is not exclusively a software function, but the management of people skills, requiring a dedication to database accuracy, and sufficient computer resources. It is a total company management concept for using human and company resources more productively.

A master production schedule (MPS) is a plan for individual commodities to be produced in each time period such as production, staffing, inventory, etc. It is usually linked to manufacturing where the plan indicates when and how much of each product will be demanded. This plan quantifies significant processes, parts, and other resources in order to optimize production, to identify bottlenecks, and to anticipate needs and completed goods. Since a MPS drives much factory activity, its accuracy and viability dramatically affect profitability.

Procure-to-pay (P2P) is a term used in the software industry to designate a specific subdivision of the procurement process. The procure-to-pay systems enable the integration of the purchasing department with the accounts payable (AP) department. Some of the largest players of the software industry agree on a common definition of procure-to-pay, linking the procurement process and financial department.

LO 2, AC 2.3