Halloween Special - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: sntaclus

examout.co

A technician installs a condenser microphone. It is not picking up audio. What is the MOST LIKELY cause?

A.

Pins 2 and 3 are swapped at the XLR connector

B.

The cable run is too long

C.

Phantom power is turned off

D.

The microphone is defective

What type of drawing view shows the layout of items on the ceiling?

A.

Reflected ceiling plan

B.

Reflected floor plan

C.

Detail ceiling drawing

D.

Elevation drawing

Where should you place the wireless microphone receiver antenna in a rack assembly?

A.

Line of sight to the transmitter

B.

Inside the transmitter room

C.

In the front of the rack

D.

At the rear of the rack

What type of termination technique is used for a BNC connector?

A.

Solder

B.

Crimp

C.

Insulation displacement

D.

Stab and twist

When training a customer on the operation of a touch panel interface, an example that the GUI is a good design that meets the customer's needs:

A.

The customer can easily step in and use the Touch Panel with little explanation

B.

The customer requires intensive training on the operation of the Touch panel

C.

The customer thinks the panel looks cool

D.

The customer wants only a few changes

The key elements of a project should be driven by:

A.

The cost of materials

B.

The overall budget

C.

The client's need

D.

The deadline for completion

Soldering is the process of joining two conductive components in a way that ____.

A.

Continues the electrical path.

B.

Decreases the resistance of the components.

C.

Insulates one from the other.

D.

Protects the user from electric shock.

The ANSI/AVIXA 2M-2010 Standard Guide for Audiovisual Systems Design Coordination Processes lays out a procedure for determining the:

A.

functions and features that are required to support a given set of tasks

B.

project communication that needs to take place on a given project

C.

room types that are suitable for a given set of client needs

D.

verification tests that should be performed during a given project

What is a benefit of using the verification standard for system closeout? (Choose all that apply.)

A.

It aligns outcome and performance expectations at an early stage in the project.

B.

It reduces project risk through early identification of problems, thereby reducing the likelihood of remedial work.

C.

It provides a verifiable outcome.

D.

It creates a common language between all parties.

_____ draws all the odd lines of a video signal from top to bottom, then all the even lines in the same order.

A.

The frame rate

B.

Interlaced scanning

C.

1080p

D.

Progressive scanning