Free Practice Questions for ASIS ASIS-PSP Exam

In selecting video surveillance cameras, the primary criterion is the ability to clearly identify objects or individuals within the monitored area, which is directly determined by the horizontal resolution.

Horizontal resolution represents the number of distinct points of information captured across the width of the scene and dictates the level of detail available for identification.

Pixel count or chip output alone does not guarantee usable image quality; it must be supported by optics and scene coverage.

Sensitivity affects performance in low-light conditions but is secondary when the main goal is resolution-based identification.

Focal length adjusts the field of view but does not replace the need for sufficient horizontal resolution to meet identification objectives.

ASIS PSP guidance stresses that camera selection should align with the operational purpose, ensuring captured video meets evidentiary and situational awareness requirements while optimizing system design and cost efficiency.

A security system’s power supply must be sized with headroom to accommodate additional devices, future expansion, and potential peak loads. ASIS PSP guidance recommends that the system load should not exceed 60% of the total power capacity.

Loading above this threshold can reduce system reliability, limit the ability to add new devices, and stress power components, potentially shortening equipment lifespan.

Maintaining a margin ensures that batteries and power supplies can support the system under normal and emergency conditions, including temporary peak loads.

This practice aligns with standard design principles for redundancy, scalability, and safe operation of integrated security systems.

Enterprise Security Risk Management (ESRM) considers a variety of operating environments that influence organizational risk, including geopolitical, economic, legal, and technological factors. The geopolitical environment—such as regional instability, regulatory changes, and political threats—plays a critical role in shaping security strategy and risk prioritization.

A (Legal), B (Digital), and C (Physical) are important, but they are all subsets of the broader geopolitical and global risk context within ESRM.

The number of security personnel required is typically directly proportional to the size and complexity of a facility, not inversely. Larger facilities or those with more employees often require more security staff to ensure adequate coverage, surveillance, access control, and emergency response. Factors influencing personnel needs include square footage, asset value, location, threat level, and operational hours.

The statement in the question is incorrect, making the correct answer " False. "

Microwave sensors are active volumetric sensors that transmit microwave signals and detect motion based on frequency changes. For optimal coverage and effectiveness, they are typically mounted near the ceiling of the protected area. This elevated placement allows the sensor to cover a wider detection zone and reduces interference from obstacles such as furniture or equipment. In workplace security and Human Resource safety management, proper sensor placement is essential to ensure reliable detection and minimize false alarms. Mounting sensors too low can limit their range and increase the likelihood of obstructions affecting performance. Positioning them at ceiling level enhances monitoring efficiency and supports a safer working environment by ensuring comprehensive coverage. Therefore, option D is correct because it provides the most effective installation position for microwave sensors.

Insurance is not a substitute for a security program. It only compensates for loss after it occurs and does not prevent incidents. A comprehensive security program includes preventive measures such as access control, surveillance, personnel training, and emergency planning, which work in tandem with insurance as part of a broader risk management strategy.

References from PSP: ASIS POA – Insurance vs. Security Controls; PSP Study Guide – Prevention vs. Compensation

A tort is a civil wrong for which a remedy may be obtained in the form of damages. It is based on the idea that individuals owe certain duties to others and can be held liable when they breach those duties, resulting in harm or injury.

Transitivity (A), Reassembly (C), and Procurement (D) are not related to civil legal liability.

Smoldering burning is the final phase of a fire where visible flames are no longer present, but extreme heat persists. This occurs when the available fuel is nearly consumed, or oxygen is limited, creating a high-temperature environment without active flames. It poses a serious re-ignition risk.

Ignition stage (B) is the beginning of the fire.

Last stage (C) is too vague.

Incipient stage (D) refers to the early development before flames appear.

Comprehensive Detailed Explanation:

Pre-qualifying vendors ensures that only those with the necessary experience, resources, and qualifications are invited to bid on a project. This avoids wasted effort on unqualified proposals and increases the likelihood of successful project execution.

A (Code enforcement) and D (Spec compliance) happen during later review stages.

C (Financial stability) is one part of the evaluation but not the sole goal.

Comprehensive Detailed Explanation and References

Intrusion alarms are systems specifically designed to detect unauthorized entry into a protected area while the system is active. These alarms respond when a perimeter is breached, such as through windows, doors, or motion detection. When triggered, they signal unauthorized access.