Free Practice Questions for AHA CHFM Exam

Under the ADA Accessibility Guidelines (ADAAG), room identification signs must include raised tactile characters and Braille. These apply to permanent spaces such as patient rooms, restrooms, and offices.

C. room identification (Correct): Required by ADA to have tactile and Braille.

A. directional: May use visual characters only; Braille is not required.

B. informational: Same as directional, not required to have Braille.

D. mechanical spaces: These areas are typically staff-only; signs do not require tactile or Braille by ADA standards.

The CHFM exam Financial Management domain requires knowledge of cost savings and revenue generation calculations from operational changes such as recycling initiatives. In this example, gross revenue is calculated by summing the total recycling income streams (cardboard and aluminum).

Correct Answer (C. $7,200): Derived from combining $6,000 (cardboard) and $1,200 (aluminum) revenue.

Other options are incorrect because:

A ($6,000): Considers cardboard only.

B ($6,600): Misapplies aluminum tonnage conversion.

D ($18,000): Exaggerates revenue beyond calculated amounts.

The primary cause of change orders is incomplete or unclear plans and specifications. Ensuring that drawings and specs are fully developed before bidding reduces ambiguity, scope gaps, and the likelihood of modifications during construction.

A (Correct): Complete plans/specs = fewer change orders.

B: Bonds/policies protect financially but do not reduce change orders.

C: Prequalification ensures capable bidders but doesn’t eliminate scope issues.

D: Competent managers/subcontractors help but cannot offset incomplete design docs.

Any renovation project in a healthcare environment—even in non-clinical spaces like a dietitian’s office—requires evaluation of infection control and safety hazards. The Infection Control Risk Assessment (ICRA) process, supported by The Joint Commission and Facility Guidelines Institute (FGI) standards, mandates involvement of infection prevention and safety personnel in planning.

Correct (D): Ensures compliance with infection prevention standards and staff/patient safety during renovation.

Incorrect:

A. housekeeping and security: Important for support but not primary coordinators.

B. interior designer and supply chain: Handle design and material procurement, but not regulatory compliance.

C. information technologies and finance: Important in certain projects, but not relevant for infection/safety planning.

Acceptable indoor CO₂ concentrations in healthcare facilities are generally expected to remain below 1,000 ppm, as recommended by ASHRAE Standard 62.1 (Ventilation for Acceptable Indoor Air Quality). A reading of 1,500 ppm typically signals inadequate ventilation and insufficient outside air being introduced into the space. This is a direct indicator of poor dilution of indoor contaminants.

Correct: Lack of outside air (C) – High CO₂ concentrations are directly linked to reduced outside air supply.

Incorrect:

A. Within design – Not correct, since 1,500 ppm exceeds design thresholds.

B. Vehicular exhaust – Would raise CO and NOx levels, not primarily CO₂.

D. Humidity/dewpoint – Unrelated to CO₂ measurement.

According to NFPA 251 (Standard Methods of Tests of Fire Resistance of Building Construction and Materials), once a material or assembly is tested and a measure of time is obtained, that result is defined as the fire resistance rating. This rating expresses the duration that a building element can withstand a standardized fire exposure while maintaining structural integrity.

Correct Answer (B. fire resistance rating): NFPA 251 specifically defines this as the time result from fire exposure testing. It applies to walls, floors, and structural assemblies.

Incorrect Options:

A. flame spread rating: This measures only the surface burning characteristics of materials, determined using ASTM E84 or UL 723, not the endurance of an entire assembly.

C. fire assembly rating: This is not an officially recognized NFPA term; the proper terminology is fire resistance rating.

D. fire protection rating: This applies to opening protectives such as doors, windows, or shutters, which are tested using NFPA 252 or NFPA 257, not NFPA 251. Fire protection ratings are distinct from fire resistance ratings, since they do not measure full structural endurance.

Relevance to CHFM Compliance Domain:

The Certified Health Care Facility Manager (CHFM) exam includes compliance with fire and life safety codes under its “Compliance” content area. The CHFM Candidate Handbook emphasizes the requirement to understand and apply NFPA standards in healthcare facilities, ensuring compliance with regulatory fire safety measures such as those defined in NFPA 251.

NFPA uses mandatory language to indicate requirements:

“Shall” = mandatory requirement (must comply).

“Should” = advisory or recommended practice.

Therefore, when NFPA states “shall,” it represents a mandate.

D. mandate (Correct): Required compliance.

A. recommendation / B. guideline: NFPA uses “should” for recommendations.

C. performance standard: Not the intent of “shall” language.

Scale forms where water is in direct contact with heated surfaces. In steam boilers, that location is below the water line, where dissolved minerals (calcium, magnesium, silica) precipitate and adhere to heat-transfer surfaces as scale. This reduces efficiency and can cause overheating of boiler tubes.

B. below the water line (Correct): Primary area where water meets heat-transfer surfaces; mineral deposits form here.

A. huddling chamber: This is part of a safety relief valve, not a surface for scale buildup.

C. weld above the water line: There is no continuous water exposure above the water line, so scale does not accumulate there.

D. blowdown valve: This is used to remove sludge/sediment, not a typical location for scale accumulation.

“WAGD” stands for Waste Anesthetic Gas Disposal. These outlets are installed in operating rooms to remove excess anesthetic gases exhaled by patients or escaping from anesthesia equipment. The purpose is to maintain staff safety and compliance with NFPA 99 (Health Care Facilities Code), which requires WAGD systems in anesthetizing locations.

Correct (D): Operating rooms require WAGD outlets as part of medical gas and vacuum systems.

Incorrect:

A. boiler room: No patient care; WAGD outlets are not relevant.

B. electrical closet: For electrical equipment only, no medical gases.

C. laundry room: Handles linens, not anesthetic gas removal.

Compute project labor:

Two carpenters (project): $40 × 20 hr/wk × 78 wk × 2 = $124,800

One laborer (project): $20 × 40 hr/wk × 78 wk = $62,400

Supervisor (project): $45 × 10 hr/wk × 104 wk = $46,800

Project total = $124,800 + $62,400 + $46,800 = $234,000

Compute operations/maintenance labor:

Two carpenters (maintenance): $40 × 20 hr/wk × 78 wk × 2 = $124,800

Supervisor (maintenance): $45 × 10 hr/wk × 104 wk = $46,800

Operations total = $124,800 + $46,800 = $171,600

Therefore: Project = $234,000; Operations = $171,600.